Datasheet4U Logo Datasheet4U.com

SN75C08 - SCSI INPUT/OUTPUT BUFFER

Description

The SN75C08 is an input/output SCSI buffer with eight channels.

One channel, REQ (request), is an open-drain driver that includes controlled rise and fall times to reduce crosstalk and RF emissions on the SCSI bus.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN7500 Pulse Width Modulation KODENSHI
SN7500P Pulse Width Modulation KODENSHI
SN75173 Quad EIA-485 Line Receivers Motorola
SN75175 QUAD EIA-485 LINE RECEIVER Motorola
SN75175 Quad EIA-485 Line Receivers Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN75C091A SCSI Bus Controller
SN75C1154 QUADRUPLE LOW-POWER DRIVERS/RECEIVERS
SN75C1154N QUADRUPLE LOW-POWER DRIVERS/RECEIVERS
SN75C1167 DUAL DIFFERENTIAL DRIVERS/RECEIVERS
SN75C1168 DUAL DIFFERENTIAL DRIVERS/RECEIVERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
• Single-Ended Driver for Request Line With Improved Characteristics • Single-Ended Receiver for ACKNOWLEDGE Line With Improved Characteristics • Controlled Driver Rise and Fall Times 10 ns Typ • High Receiver Input Hysteresis 600 mV Typ • Receiver Input Noise Pulse Filter 2.5 ns Max • Request and Acknowledge Meet ANSI X3.131-1986 (SCSI) • Packaged in Thin Shrink-Small-Outline Package With 25-mil Pin Pitches • Designed to Operate at 5 Million Transfers Per Second • Power Up/Down Glitch Protection • High Impedance With VCC = 0 V description The SN75C08 is an input/output SCSI buffer with eight channels. One channel, REQ (request), is an open-drain driver that includes controlled rise and fall times to reduce crosstalk and RF emissions on the SCSI bus.
Published: |