SN74LVC2T45-EP Datasheet DUAL-BIT DUAL-SUPPLY BUS TRANSCEIVER

Manufacturer: Texas Instruments

SN74LVC2T45-EP dual-bit dual-supply bus transceiver by Texas Instruments - Datasheet Preview

Datasheet Details

Part number	SN74LVC2T45-EP
Manufacturer	Texas Instruments
File Size	380.51 KB
Description	DUAL-BIT DUAL-SUPPLY BUS TRANSCEIVER
Download	SN74LVC2T45-EP Download (PDF)

General Description

/ORDERING INFORMATION This dual-bit noninverting bus transceiver uses two separate configurable power-supply rails.

The A port is designed to track VCCA.

VCCA accepts any supply voltage from 1.65 V to 5.5 V.

Overview

SN74LVC2T45-EP www.ti.com SCES777C – NOVEMBER 2008 – REVISED JULY 2010 DUAL-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS Check for Samples:.

Key Features

1.
Available in the Texas Instruments NanoFree™ Package.
Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.65-V to 5.5-V Power-Supply Range.
VCC Isolation Feature.
If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State.
DIR Input Circuit Referenced to VCCA.
Low Power Consumption, 10-mA Max ICC.
±24-mA Output Drive at 3.3 V.
Ioff Supports Partial-Power-Down Mode Operation.

More Datasheets from Texas Instruments

Part Number	Description
SN74LVC2T45-Q1	DUAL-BIT DUAL-SUPPLY BUS TRANSCEIVER
SN74LVC2T45	Dual-Bit Dual-Supply Bus Transceiver
SN74LVC2244A	Octal Buffer/Driver
SN74LVC240A	Octal Buffer/Driver
SN74LVC244A	Octal Buffer/Driver
SN74LVC244A-Q1	OCTAL BUFFER/DRIVER
SN74LVC244AN	Octal Buffer/Driver
SN74LVC245A	Octal Bus Transceiver
SN74LVC245A-EP	OCTAL BUS TRANSCEIVER
SN74LVC245AN	Octal Bus Transceiver