Datasheet4U Logo Datasheet4U.com

SN74LVC244A - Octal Buffer/Driver

General Description

These octal bus buffers are designed for 1.65-V to 3.6-V VCC operation.

The SN74LVC244A devices are designed for asynchronous communication between data buses.

Key Features

  • Operates From 1.65 V to 3.6 V.
  • Inputs Accept Voltages to 5.5 V.
  • Specified From.
  • 40°C to +85°C and.
  • 40°C to +125°C.
  • Maximum tpd of 5.9 ns at 3.3 V.
  • Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C.
  • Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C.
  • Supports Mixed-Mode Signal Operation on All Ports (5-V Input or Output Voltage With 3.3-V VCC).
  • Ioff Supports Live Insertio.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC244A-Q1 OCTAL BUFFER/DRIVER
SN74LVC244AN Octal Buffer/Driver
SN74LVC240A Octal Buffer/Driver
SN74LVC245A Octal Bus Transceiver
SN74LVC245A-EP OCTAL BUS TRANSCEIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com SN74LVC244A SCAS414AC – NOVEMBER 1992 – REVISESDNO7C4TLOVBCER242042A0 SCAS414AC – NOVEMBER 1992 – REVISED OCTOBER 2020 SN74LVC244A Octal Buffer or Driver With 3-State Outputs 1 Features • Operates From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Specified From –40°C to +85°C and –40°C to +125°C • Maximum tpd of 5.9 ns at 3.3 V • Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C • Supports Mixed-Mode Signal Operation on All Ports (5-V Input or Output Voltage With 3.3-V VCC) • Ioff Supports Live Insertion, Partial-Power-Down Mode, and Back-Drive Protection • Can Be Used as a Down Translator to Translate Inputs From a Maximum of 5.