Datasheet4U Logo Datasheet4U.com

SN74LVC2G38 - Dual 2-Input NAND Gate

General Description

The SN74LVC2G38 is designed for 1.65-V to 5.5-V VCC operation.

This device is a dual two-input NAND buffer gate with open-drain outputs.

B or Y = A + B in positive logic.

Key Features

  • 1.
  • 2 Available in the Texas Instruments NanoFree™ Package.
  • Supports 5-V VCC Operation.
  • Inputs Accept Voltages to 5.5 V.
  • Max tpd of 4 ns at 3.3 V.
  • Low Power Consumption, 10-μA Max ICC.
  • ±24-mA Output Drive at 3.3 V.
  • Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, TA = 25°C.
  • Ioff Supports Live insertion, Partial-PowerDown Mode Operation and.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC2G32 Dual 2-Input Positive-OR Gate
SN74LVC2G32-EP Dual 2-Input Positive-OR Gate
SN74LVC2G32-Q1 Dual 2-Input Positive-OR Gate
SN74LVC2G34 Dual Buffer Gate
SN74LVC2G34-EP Dual Buffer Gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com SN74LVC2G38 SCES554D – MARCH 2004 – REVISED DECEMBER 2013 Dual 2-Input NAND Gate With Open-Drain Outputs Check for Samples: SN74LVC2G38 FEATURES 1 •2 Available in the Texas Instruments NanoFree™ Package • Supports 5-V VCC Operation • Inputs Accept Voltages to 5.5 V • Max tpd of 4 ns at 3.3 V • Low Power Consumption, 10-μA Max ICC • ±24-mA Output Drive at 3.3 V • Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.