Datasheet4U Logo Datasheet4U.com

SN74CB3Q16245 - 2.5-V/3.3-V LOW-VOLTAGE FET BUS SWITCH

General Description

The SN74CB3Q16245 is a high-bandwidth FET bus switch utilizing a charge pump to elevate the gate voltage of the pass transistor, providing a low and flat ON-state resistance (ron).

Key Features

  • Member of the Texas Instruments Widebus™ Family.
  • High-Bandwidth Data Path (up to 500 MHz (1)).
  • 5-V Tolerant I/Os With Device Powered Up or Powered Down.
  • Low and Flat ON-State Resistance (ron) Characteristics Over Operating Range (ron = 5 Ω Typ).
  • Rail-to-Rail Switching on Data I/O Ports.
  • 0- to 5-V Switching With 3.3-V VCC.
  • 0- to 3.3-V Switching With 2.5-V VCC.
  • Bidirectional Data Flow With Near-Zero Propagation Delay.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74C74N Dual D-Type Flip-Flop ETC
SN74101 AND-OR Gate ETC
SN74102 AND Gate ETC
SN74103 Dual J-K Flip-Flop ETC
SN74106 Dual J-K Flip-Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74CB3Q16244 16-Bit FET Bus Switch
SN74CB3Q16210 2.5-V/3.3-V LOW-VOLTAGE FET BUS SWITCH
SN74CB3Q16211 2.5-V/3.3-V Low-Voltage FET Bus Switch
SN74CB3Q16811 2.5-V/3.3-V LOW-VOLTAGE FET BUS SWITCH
SN74CB3Q3125 Quadruple FET Bus Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com FEATURES • Member of the Texas Instruments Widebus™ Family • High-Bandwidth Data Path (up to 500 MHz (1)) • 5-V Tolerant I/Os With Device Powered Up or Powered Down • Low and Flat ON-State Resistance (ron) Characteristics Over Operating Range (ron = 5 Ω Typ) • Rail-to-Rail Switching on Data I/O Ports – 0- to 5-V Switching With 3.3-V VCC – 0- to 3.3-V Switching With 2.5-V VCC • Bidirectional Data Flow With Near-Zero Propagation Delay • Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 4 pF Typ) • Fast Switching Frequency (fOE = 20 MHz Max) • Data and Control Inputs Provide Undershoot Clamp Diodes • Low Power Consumption (ICC = 1 mA Typ) • VCC Operating Range From 2.3 V to 3.6 V • Data I/Os Support 0- to 5-V Signaling Levels (0.8 V, 1.2 V, 1.5 V, 1.