Datasheet4U Logo Datasheet4U.com

SN74AUC16244 - 16-BIT BUFFER/DRIVER

General Description

This 16-bit buffer/driver is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC operation.

Key Features

  • 1.
  • 2 Member of the Texas Instruments Widebus™ Family.
  • Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation.
  • Ioff Supports Partial-Power-Down Mode Operation.
  • Sub-1-V Operable.
  • Max tpd of 2 ns at 1.8 V.
  • Low Power Consumption, 20-µA Max ICC.
  • ±8-mA Output Drive at 1.8 V.
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II.
  • ESD Protection Exceeds JESD 22.
  • 2000-V Hum.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74101 AND-OR Gate ETC
SN74102 AND Gate ETC
SN74103 Dual J-K Flip-Flop ETC
SN74106 Dual J-K Flip-Flop ETC
SN74108 Dual J-K Flip Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74AUC16240 16-BIT BUFFER/DRIVER
SN74AUC16245 16-BIT BUS TRANSCEIVER
SN74AUC16373 16-BIT TRANSPARENT D-TYPE LATCH
SN74AUC16374 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP
SN74AUC125 QUADRUPLE BUS BUFFER GATE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com SN74AUC16244 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS SCES399E – JULY 2002 – REVISED FEBRUARY 2008 FEATURES 1 •2 Member of the Texas Instruments Widebus™ Family • Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation • Ioff Supports Partial-Power-Down Mode Operation • Sub-1-V Operable • Max tpd of 2 ns at 1.8 V • Low Power Consumption, 20-µA Max ICC • ±8-mA Output Drive at 1.8 V • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II • ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) DESCRIPTION/ORDERING INFORMATION This 16-bit buffer/driver is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC operation.