Datasheet4U Logo Datasheet4U.com

SN74ACT373 - OCTAL D-TYPE TRANSPARENT LATCHES

General Description

These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads.

The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74101 AND-OR Gate ETC
SN74102 AND Gate ETC
SN74103 Dual J-K Flip-Flop ETC
SN74106 Dual J-K Flip-Flop ETC
SN74108 Dual J-K Flip Flop ETC

Other Datasheets by Texas Instruments

Part Number Description
SN74ACT373-EP OCTAL D-TYPE TRANSPARENT LATCHES
SN74ACT374 Octal D-Type Edge-Triggered Flip-Flops
SN74ACT32 QUADRUPLE 2-INPUT POSITIVE-OR GATES
SN74ACT00 Quadruple 2-Input Positive-NAND Gates
SN74ACT00-Q1 QUADRUPLE 2-INPUT POSITIVE-NAND GATES

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54ACT373, SN74ACT373 OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS SCAS544E – OCTOBER 1995 – REVISED OCTOBER 2002 D 4.5-V to 5.5-V VCC Operation D Inputs Accept Voltages to 5.5 V D Max tpd of 10 ns at 5 V D Inputs Are TTL-Voltage Compatible description/ordering information These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight latches are D-type transparent latches. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the logic levels set up at the D inputs. SN54ACT373 . . .