Datasheet4U Logo Datasheet4U.com

SN65HVD3086E Datasheet Low-power Rs-485 Full-duplex Drivers/receivers

Manufacturer: Texas Instruments

Overview: www.ti.com SN65HVD3080E SN65HVD3083E SN65HVD3086E SLLS771E – NOVEMBER 2006 – REVISED NOVEMBER 2012 LOW-POWER RS-485 FULL-DUPLEX DRIVERS/RECEIVERS Check for Samples: SN65HVD3080E, SN65HVD3083E,.

This datasheet includes multiple variants, all published together in a single manufacturer document.

General Description

Each of these devices is a balanced driver and receiver designed for full-duplex RS-485 or RS-422 data bus networks.

Powered by a 5-V supply, they are fully compliant with the TIA/EIA-485A standard.

With controlled bus output transition times, the devices are suitable for signaling rates from 200 kbps to 20 Mbps.

Key Features

  • 1.
  • Low Quiescent Power.
  • 375 μA (Typical) Enabled Mode.
  • 2 nA (Typical) Shutdown Mode.
  • Small MSOP Package.
  • 1/8 Unit-Load.
  • Up to 256 Nodes per Bus.
  • 16 kV Bus-Pin ESD Protection, 6 kV All Pins.
  • Failsafe Receiver (Bus Open, Short, Idle).
  • TIA/EIA-485A Standard Compliant.
  • RS-422 Compatible.
  • Power-Up, Power-Down Glitch-Free Operation.

More Datasheets from Texas Instruments

Part Number Description
SN65HVD3080E LOW-POWER RS-485 FULL-DUPLEX DRIVERS/RECEIVERS
SN65HVD3082E Low-Power RS-485 Transceivers
SN65HVD3083E LOW-POWER RS-485 FULL-DUPLEX DRIVERS/RECEIVERS
SN65HVD3085E Low-Power RS-485 Transceivers
SN65HVD3088E Low-Power RS-485 Transceivers
SN65HVD30 3.3-V Full-Duplex RS-485 Drivers and Receivers
SN65HVD30-EP 3.3-V Full-Duplex RS-485 Drivers And Receivers
SN65HVD31 3.3-V Full-Duplex RS-485 Drivers and Receivers
SN65HVD31-EP 3.3-V Full-Duplex RS-485 Drivers And Receivers
SN65HVD32 3.3-V Full-Duplex RS-485 Drivers and Receivers

SN65HVD3086E Distributor