Datasheet4U Logo Datasheet4U.com

ISO1176T - Profibus RS-485 Transceiver

Description

The ISO1176T is an isolated differential line transceiver with integrated oscillator outputs that provide the primary voltage for an isolation transformer.

Features

  • 1 Meets or Exceeds the Requirements of EN 50170 and TIA/EIA-485-A.
  • Signaling Rates up to 40 Mbps.
  • Easy Isolated Power Design with Integrated Transformer Driver.
  • Typical Efficiency > 60% (ILOAD = 100 mA) - see SLUU471.
  • Differential Output exceeds 2.1 V (54-Ω Load).
  • Low Bus Capacitance 10 pF (Maximum).
  • Fail-safe Receiver for Bus Open, Short, or Idle.
  • 50-kV/µs Typical Transient Immunity.
  • Safety and Regulatory Approvals.

📥 Download Datasheet

📁 Similar Datasheet

  • ISO113 - Low-Cost/ High-Voltage/ Internally Powered OUTPUT ISOLATION AMPLIFIER (Burr-Brown Corporation)
  • ISO100 - Optically-Coupled Linear ISOLATION AMPLIFIER (Burr-Brown Corporation)
  • ISO1002 - Small Signal Amplifier (YUAN)
  • ISO1003-xx-x - Two Wires 4-20mA Isolated Signal Transmitter (YUAN)
  • ISO102 - SIGNAL ISOLATION BUFFER AMPLIFIERS (Burr-Brown Corporation)
  • ISO103 - Low-Cost/ Internally Powered ISOLATION AMPLIFIER (Burr-Brown Corporation)
  • ISO106 - SIGNAL ISOLATION BUFFER AMPLIFIERS (Burr-Brown Corporation)
  • ISO107 - High-Voltage/ Internally Powered ISOLATION AMPLIFIER (Burr-Brown Corporation)
  • ISO120 - Precision Low Cost ISOLATION AMPLIFIER (Burr-Brown Corporation)
  • ISO121 - Precision Low Cost ISOLATION AMPLIFIER (Burr-Brown Corporation)
Other Datasheets by Texas Instruments
  • ISO1176 - RS-485 Profibus Transceiver
  • ISO1042 - CAN Transceiver
  • ISO1042-Q1 - Automotive Isolated CAN Transceiver
  • ISO1044 - Isolated CAN FD Transceiver
  • ISO1050 - CAN Transceiver
  • ISO1211 - 24-V to 60-V Digital Input Receivers
  • ISO1212 - 24-V to 60-V Digital Input Receivers
  • ISO122 - Precision Lowest-Cost Isolation Amplifier

Full PDF Text Transcription

Click to expand full text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community Reference Design ISO1176T SLLSE28G – OCTOBER 2010 – REVISED OCTOBER 2015 ISO1176T Isolated Profibus RS-485 Transceiver with Integrated Transformer Driver 1 Features •1 Meets or Exceeds the Requirements of EN 50170 and TIA/EIA-485-A • Signaling Rates up to 40 Mbps • Easy Isolated Power Design with Integrated Transformer Driver • Typical Efficiency > 60% (ILOAD = 100 mA) - see SLUU471 • Differential Output exceeds 2.
Published: |