CC2592 Datasheet | Texas Instruments

Features - Seamless Interface to 2.4-GHz Low-Power RF Devices from Texas Instruments - +22-d Bm Output Power - 3-d B Typical Improved Sensitivity on CC2520, CC253X, and CC85XX - Very Few External ponents - Integrated Switches - Integrated Matching Network - Integrated Balun - Integrated Inductors - Integrated PA - Integrated LNA - Digital Control of LNA Gain by HGM Terminal - 100 n A in Power Down (LNA_EN = PA_EN = 0) - Low-Transmit Current Consumption - 155 m A at 3 V for +22 d Bm, PAE = 34% - Low-Receive Current Consumption - 4.0-m A for High-Gain Mode - 1.9-m A for Low-Gain Mode - 4.7-d B LNA Noise Figure, Including T/R Switch and External Antenna Match - Ro HS pliant 4-mm × 4-mm QFN-16 Package - 2.0-V to 3.7-V Operation - - 40°C to +125°C Operation 1.2 Applications - All 2.4-GHz ISM Band Systems - Wireless Sensor Networks - Wireless Industrial Systems - IEEE 802.15.4 and Zig Bee® Metering Systems - IEEE 802.15.4 and Zig Bee Gateways - Wireless Consumer Systems - Wireless Audio Systems 1.3 Description The CC2592 device is a cost-effective and high-performance RF front end for low-power and low-voltage 2.4-GHz wireless applications. The CC2592 device is a range extender for all CC25XX 2.4-GHz low-power RF transceivers, transmitters, and system-on-chip products from Texas Instruments. To increase the link budget, the CC2592 device provides a power amplifier for increased output power and an LNA with a low-noise figure for improved receiver sensitivity. The CC2592 device provides a very small size, high-output power RF design with its 4-mm × 4-mm QFN16 package. The CC2592 device contains PA, LNA, switches, RF-matching, and balun for simple design of highperformance wireless applications. An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION...