www.vishay.com
PTN
Vishay Dale Thin Film
Commercial Thin Film Chip Resistor,
Surface Mount Chip
Actual Size
1505
These chip resistors are available in both “top side” and
“wraparound” termination styles in a variety of sizes. They
incorporate self passivated, enhanced Tantalum Nitride
films, to give superior performance on moisture resistance,
voltage coefficient, power handling and resistance stability.
The terminations consist of an adhesion layer, a leach
resistant nickel barrier, and solder coating. This product
will out-perform all requirements of characteristic E of
MIL-PRF-55342.
CONSTRUCTION
Passivation
Tantalum Nitride
Resistive Film
Solder
Coating
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
FEATURES
• Moisture resistant
• High purity alumina substrate
• Non-standard values available
Available
• Will pass +85 °C, 85 % relative humidity and
10 % rated power
Available
• 100 % visual inspected per MIL-PRF-55342
• Non-inductive
• Very low noise and voltage coefficient (< -30 dB)
Available
• Laser-trimmed tolerances to ± 0.05 %
• Wraparound resistance less than 10 m
Available
• Epoxy bondable termination available
• Sulfur resistant (per ASTM B809-95 humid vapor test)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
10
0.05
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
SPECIFICATIONS
Tantalum nitride
1.0 to 3 M
± 10 ppm/°C to ± 100 ppm/°C
± 0.05 % to ± 5 %
R ± 0.03 %
-
0.1 ppm/V
75 V to 200 V
-55 °C to +155 °C
-55 °C to +155 °C
< -30 dB
-
CONDITIONS
-
-
-55 °C to +125 °C
+25 °C
2000 h at 70 °C
-
-
-
-
-
-
-
COMPONENT RATINGS
CASE SIZE (1)
POWER RATING (mW)
WORKING VOLTAGE (V)
0402
50
75
0502
100
75
0505
150
75
0603
150
75
0705
200
100
0805
200
100
1005
250
100
1010
500
150
1206
400
200
1505
400
150
2208
750
150
2010
2512 (2)
800
2000
200
200
Notes
(1) 0705 and 0805 are the same (only use 0805 when ordering)
(2) Reference environmental tests table for short time overload test parameters.
RESISTANCE RANGE ()
1.5 to 51.1K
1.5 to 65K
10 to 130K
1.5 to 130K
1.0 to 310K
1.0 to 310K
1.5 to 360K
1.0 to 600K
1.5 to 1M
1.25 to 1M
2.0 to 1.75M
1.0 to 2M
1.5 to 3M
Revision: 13-Oct-16
1 Document Number: 60026
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
