Datasheet4U Logo Datasheet4U.com

UTCMC14511 - CMOS IC BCD-TO-SEVEN SEGMENT LATCH/DECODER/DRIVER

Description

The UTC MC14511 BCD to

seven segment latch/decoder/driver is constructed with complementary MOS (CMOS) enhancement mode devices and NPN bipolar output drivers in a single monolithic structure.

Features

  • Low Logic Circuit Power Dissipation.
  • High.
  • Current Sourcing Outputs (Up to 25 mA).
  • Latch Storage of Code.
  • Blanking Input.
  • Lamp Test Provision.
  • Readout Blanking on all Illegal Input Combinations.
  • Lamp Intensity Modulation Capability.
  • Time Share (Multiplexing) Facility.
  • Supply Voltage Range = 3.0 V ~ 18 V.
  • Capable of Driving Two Low-power TTL Loads, One Low-power Schottky TTL Load or Two HTL Loads Over the Rated Temperature Range.
  • Chip.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UTC-1005 Thin Film Cascadable Amplifier Teledyne
UTC-1044 Thin Film Cascadable AMplifier Agilent Technologies
UTC-111 Thin-Film Cascadable Amplifier Teledyne
UTC-2012 Thin-Film Cascadable Amplifier Teledyne Cougar
UTC-2321 Thin-Film Cascadable Amplifier Teledyne

Other Datasheets by Unisonic Technologies

Part Number Description
UTCMC3361BP LOW VOLTAGE/POWER NARROW BAND FM IF
UTCMC34018 VOICE SWITCHED SPEAKER-PHONE CIRCUIT
UTCMC34063 DC TO DC CONVERTER CONTROLLER
UTCMC34063A DC TO DC CONVERTER CONTROLLER
UTCMC34072 HIGH SLEW RATE/ WIDE BANDWIDTH/ SINGLE SUPPLY OPERATIONAL AMPLIFIERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UTC MC14511 BCD-TO-SEVEN SEGMENT LATCH/DECODER/DRIVER DESCRIPTION The UTC MC14511 BCD–to–seven segment latch/decoder/driver is constructed with complementary MOS (CMOS) enhancement mode devices and NPN bipolar output drivers in a single monolithic structure. The circuit provides the functions of a 4-bit storage latch, an 8421 BCD-to-seven segment decoder, and an output drive capability. Lamp test (LT), blanking (BI), and latch enable (LE) inputs are used to test the display, to turn-off or pulse modulate the brightness of the display, and to store a BCD code, respectively. It can be used with seven-segment light-emitting diodes (LED), incandescent, fluorescent, gas discharge, or liquid crystal readouts either directly or indirectly. Applications include instrument (e.g., counter, DVM, etc.
Published: |