Datasheet4U Logo Datasheet4U.com

U74CBTLV3245 - LOW-VOLTAGE OCTAL FET BUS SWITCH

General Description

The U74CBTLV3245 provides eight bits of high-speed bus switching in a standard '245 device pinout.

The low on-state resistance of the switch allows connections to be made with minimal propagation delay.

The device is organized as one 8-bit switch.

Key Features

  • S.
  • 5Ω Switch Connection Between Two Ports.
  • Standard ‘245-Type Pinout.
  • Isolation Under Power-Off Conditions.
  • Rail-to-Rail Switching on Data I/O Ports.
  • IOFF Supports Partial-Power-Down Mode Operation.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
U74CBTLV3125 LOW-VOLTAGE QUADRUPLE FET BUS SWITCH Unisonic Technologies
U74CBTLV3126 LOW-VOLTAGE QUADRUPLE FET BUS SWITCH Unisonic Technologies
U74CBT1G125 SINGLE FET BUS SWITCH Unisonic Technologies
U74CBT1G384 SINGLE FET BUS SWITCH Unisonic Technologies
U74CBT1G385 SINGLE FET BUS SWITCH Unisonic Technologies

Other Datasheets by Unisonic Technologies

Part Number Description
U74CBTLV3251 LOW-VOLTAGE 1-OF-8 FET MULTIPLEXER/DEMULTIPLEXER
U74CBTLV3253 LOW-VOLTAGE DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER
U74CBTLV3257 LOW-VOLTAGE DUAL 4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER
U74CBT3251C 1-OF-8 FET MULTIPLEXER/DEMULTIPLEXER
U74CBT3253C DUAL 1-OF-4 FET MULTIPLEXER/EMULTIPLEXER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD U74CBTLV3245 Preliminary LOW-VOLTAGE OCTAL FET BUS SWITCH CMOS IC  DESCRIPTION The U74CBTLV3245 provides eight bits of high-speed bus switching in a standard '245 device pinout. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The device is organized as one 8-bit switch. When output enable ( OE ) is low, the 8-bit bus switch is on, and port A is connected to port B. When OE is high, the switch is open, and the high-impedance state exists between the two ports. This device is fully specified for partial-power-down applications using IOFF. The IOFF feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.