K2610 Datasheet | Toshiba

.Data Sheet.co.kr 2SK2610 TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (π- MOSIII) 2SK2610 Chopper Regulator, DC- DC Converter and Motor Drive Applications z Low drain- source ON resistance z High forward transfer admittance z Low leakage current z Enhancement mode : RDS (ON) = 2.3 Ω (typ.) : |Yfs|= 4.4 S (typ.) Unit: mm : IDSS = 100 μA (max) (VDS = 720 V) : Vth = 2.0~4.0 V (VDS = 10 V, ID = 1 m A) Absolute Maximum Ratings (Ta = 25°C) Characteristics Drain- source voltage Drain- gate voltage (RGS = 20 kΩ) Gate- source voltage Drain current DC (Note 1) Symbol VDSS VDGR VGSS ID IDP PD EAS IAR EAR Tch Tstg Rating 900 900 ±30 5 15 150 595 5 15 150 - 55~150 Unit V V V A W m J A m J °C °C 1. GATE 2. DRAIN (HEAT SINK) 3. SOURCE Pulse (Note 1) Drain power dissipation (Tc = 25°C) Single pulse avalanche energy (Note 2) Avalanche current Repetitive avalanche energy (Note 3) Channel temperature Storage temperature range JEDEC JEITA TOSHIBA ― SC-65 2-16C1B Weight: 4.6 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Thermal Characteristics Characteristics Thermal resistance, channel to case Thermal resistance, channel to ambient Symbol Rth (ch- c) Rth (ch- a) Max 0.833 50 Unit °C / W °C / W Note 1: Ensure that the channel temperature does not exceed 150°C. Note 2: VDD = 90 V, Tch = 25°C (initial), L = 43.6 m H, IAR = 5 A, RG = 25 Ω Note 3: Repetitive rating: pulse width limited by maximum channel temperature This...