Datasheet4U Logo Datasheet4U.com

TK11148M - VOLTAGE REGULATOR

This page provides the datasheet information for the TK11148M, a member of the TK11120M VOLTAGE REGULATOR family.

Datasheet Summary

Description

The TK111xxM is a low dropout linear regulator with a builtin electronic switch.

The internal switch can be controlled by TTL or CMOS logic levels.

The device is in the “on” state when the control pin is pulled to a logic high level.

Features

  • s High Voltage Precision at ± 2.0% or ± 60 mV s Active High On/Off Control s Very Low Dropout Voltage (85 mV at 30 mA) s Very Low Noise s Miniature Package (SOT-23L-6) s Internal Thermal Shutdown s Short Circuit Protection s Excellent Ripple Rejection (70 dB @ 1 kHz) s Reverse Bias Protection.

📥 Download Datasheet

Datasheet preview – TK11148M

Datasheet Details

Part number TK11148M
Manufacturer TOKO
File Size 84.99 KB
Description VOLTAGE REGULATOR
Datasheet download datasheet TK11148M Datasheet
Additional preview pages of the TK11148M datasheet.

📁 Similar Datasheet

  • TK110A10PL - Silicon N-Channel MOSFET (Toshiba)
  • TK110A65Z - Silicon N-Channel MOSFET (Toshiba)
  • TK110E10PL - Silicon N-Channel MOSFET (Toshiba)
  • TK110E65Z - Silicon N-Channel MOSFET (Toshiba)
  • TK110N65Z - Silicon N-Channel MOSFET (Toshiba)
  • TK110P10PL - Silicon N-Channel MOSFET (Toshiba)
  • TK110U65Z - Silicon N-Channel MOSFET (Toshiba Semiconductor)
  • TK110Z65Z - Silicon N-Channel MOSFET (Toshiba)
  • TK11250C - LDO Regulator (Toko America)
  • TK11840 - DC/DC Controller (Asahi KASEI)
Other Datasheets by TOKO

Full PDF Text Transcription

Click to expand full text
TK111xxM VOLTAGE REGULATOR WITH ON/OFF SWITCH FEATURES s High Voltage Precision at ± 2.0% or ± 60 mV s Active High On/Off Control s Very Low Dropout Voltage (85 mV at 30 mA) s Very Low Noise s Miniature Package (SOT-23L-6) s Internal Thermal Shutdown s Short Circuit Protection s Excellent Ripple Rejection (70 dB @ 1 kHz) s Reverse Bias Protection DESCRIPTION The TK111xxM is a low dropout linear regulator with a builtin electronic switch. The internal switch can be controlled by TTL or CMOS logic levels. The device is in the “on” state when the control pin is pulled to a logic high level. An external capacitor can be connected to the noise bypass pin to lower the output noise level to 30 µVrms.
Published: |