SCM2007MKF Datasheet | Sanken

Description The SCM2000MKF series are 3-phase brushless motor drivers in which output transistors, pre-drive circuits, bootstrap diodes with current-limiting resistors, and a temperature-sensing thermistor are highly integrated. These products can run on a 3-shunt current detection system and optimally control the inverter systems of medium-capacity motors that require universal input standards. Features - Pb-free (Ro HS pliant) - Isolation Voltage: 2500 V (for 1 min) (UL Recognition Pending) - Built-in Thermistor - Built-in Bootstrap Diodes - CMOS-patible Input (3.3 V or 5 V) - Fault Signal Output at Protection Activation - Shutdown Signal Input - Selectable OCP Hold Time (SELECT Pin: 34 µs, 8 ms) - Protections Include: Undervoltage Lockout for Power Supply VBx Pin (UVLO_VB): Auto-restart VCCx Pin (UVLO_VCCx): Auto-restart Overcurrent Protection (OCP): Auto-restart Overvoltage Protection (OVP): Auto-restart Typical Application Controller Tem p. HIN1 HIN2 HIN3 VB1 23 HS1 24 VB2 21 HS2 22 VB3 17 HS3 18 HIN1 15 HIN2 14 HIN3 13 VCC1 12 11 1 VCC2 10 VCC1 High-side MIC OVP detection SD 9 LIN1 signal LIN1 8 LIN2 LIN2 7 LIN3 LIN3 6 5V Fault SE LECT...