Datasheet4U Logo Datasheet4U.com

S6B0086 - 65COM / 128SEG DRIVER& CONTROLLER

Description

Name Function Generates latch clock (LCK), shift clock (SCK) and control clock timing according to the input of CL1, CL2 and control inputs (CS, AMS).

In common driver application mode, this block generates the shift clock (LCK) for the common data Bi-directional shift register.

Features

  • Power supply voltage: + 5V ± 10 %, + 3V ± 10% Supply voltage for display: 6 to 28V (VDD-VEE) 4-bit parallel / 1-bit serial data processing (in segment mode) Single mode operation / dual mode operation (in common mode) Power down function (in segment mode) Applicable LCD duty: 1/64.
  • 1/256 Interface.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S6B 6 Amp Silicon Rectifier 50 to 1000 Volts Micro Commercial Components
S6B60KD IRGS6B60KD International Rectifier
S6BP201A Synchronous Buck-boost DC/DC Converter Cypress
S6BP401A Power Management Cypress
S6BP501A 3ch DC/DC Converter Cypress

Other Datasheets by Samsung Semiconductor

Part Number Description
S6B0107 64 CH SEGMENT DRIVER FOR DOT MATRIX LCD
S6B0108 64CH SEGMENT DRIVER
S6B0708 64COM/128SEG GRAPHIC DRIVER FOR DOT MATRIX LCD
S6B0715 33 COM / 100 SEG DRIVER & CONTROLLER FOR STN LCD
S6B0716 33 COM / 100 SEG DRIVER & CONTROLLER FOR STN LCD

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
S6B0086 80 CH SEGMENT / COMMON DRIVER FOR DOT MATRIX LCD June. 2000. Ver. 0.0 Contents in this document are subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of LCD Driver IC Team. S6B0086 80CH COMMON / SEGMENT DRIVER FOR DOT MATRIX LCD INTRODUCTION The S6B0086 is an LCD driver LSI which is fabricated by low power CMOS high voltage process technology. In segment driver mode, it can be interfaced in 1-bit serial or 4-bit parallel method by the controller. In common driver mode, dual type mode is applicable. And in segment mode application, the power down function reduces power consumption.