TSX3702 Datasheet | STMicroelectronics

Features - Low supply current: 5 µA typ. per parator - Wide single supply range 2.7 V to 16 V or dual supplies (±1.35 V to ±8 V) - Extremely low input bias current: 1 p A typ. - Input mon-mode voltage range includes ground - Push-pull output - High input impedance: 1012 Ω typ - Fast response time: 2.7 µs typ. for 5 m V overdrive - ESD tolerance: 4 k V HBM, 200 V MM Applications - Automotive - Industrial Description The TSX3702 is a micropower CMOS dual voltage parator which exhibits a very low current consumption of 5 µA typical per parator. This device was designed as the improvement of the TS3702: it shows a lower current consumption, a better input offset voltage, and an enhanced ESD tolerance. The TSX3702 is fully specified over a wide temperature range and is proposed in automotive grade for the SO8 package. It is fully patible with the TS3702 CMOS parator and is available with similar packages. New tiny packages (Mini SO8 and DFN8 2x2 mm) are also proposed for the TSX3702 thus allowing even more integration on applications. Related products See TSX393 for open drain output products DS10241 - Rev 6 - January 2023 For further information contact your local STMicroelectronics sales office. .st. Package pin connections Figure 1. Pin connections top view Out1 1 In1- 2 In1+ 3 + Vcc- 4 8 Vcc+ 7 Out2 - 6 In2+ 5 In2+ Package pin connections DS10241 - Rev 6 page 2/23 Absolute maximum ratings Absolute maximum ratings Table 1. Absolute maximum ratings (AMR) Symbol Parameter Value VCC + Vid Vin Vo Io Supply voltage(1) Differential input voltage(2) Input voltage Output voltage Output current Forward current in ESD protection diodes on inputs(3) 18 ±18 -0.3 to 18 18...