Datasheet4U Logo Datasheet4U.com

STBC15 - Ultra-low current consumption linear battery charger

General Description

The STBC15 is a linear charger thin film battery with a maximum charging current of 40 mA.

The device uses a CC/CV algorithm to charge the battery.

Key Features

  • Charges thin film battery with CC-CV algorithm.
  • L version suitable for Li-Ion batteries.
  • Charging current up to 40 mA (selectable by dedicated pins).
  • 250 nA battery leakage current.
  • Reverse current protection from battery to supply input.
  • Programmable floating voltage with 0.5% accuracy.
  • Battery overcurrent protection.
  • Battery over-discharge protection switch totally disconnects battery for cell durability.
  • Shelf-m.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
STBC08 800mA standalone linear Li-Ion battery charger ST Microelectronics
STB-15CAS CURRENT SENSOR Sinomags
STB-25CAS CURRENT SENSOR Sinomags
STB-50CAS CURRENT SENSOR Sinomags
STB-6CAS CURRENT SENSOR Sinomags

Other Datasheets by STMicroelectronics

Part Number Description
STBC02 Li-Ion linear battery charger
STBC03 Li-Ion linear battery charger
STB100N10F7 N-channel Power MOSFET
STB100N6F7 N-CHANNEL POWER MOSFET
STB100NF04T4 N-channel Power MOSFET

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
QFN12 1.7 x 2.0 Flip-chip12 Maturity status link STBC15 STBC15 Datasheet Ultra-low current consumption linear battery charger Features • Charges thin film battery with CC-CV algorithm • L version suitable for Li-Ion batteries • Charging current up to 40 mA (selectable by dedicated pins) • 250 nA battery leakage current • Reverse current protection from battery to supply input • Programmable floating voltage with 0.5% accuracy • Battery overcurrent protection • Battery over-discharge protection switch totally disconnects battery for cell durability • Shelf-mode supported, no battery mechanical switch needed • Power-Good open-drain output • Valid source open drain output • Peak mode input to avoid over-discharge false triggering • Available packages: – QFN12 1.7 x 2.0 mm, thickness 0.