Datasheet4U Logo Datasheet4U.com

RHF310 - high-speed operational amplifier

General Description

The RHF310 is a very low power, high-speed operational amplifier.

A bandwidth of 120 MHz is achieved while drawing only 400 µA of quiescent current.

This low-power characteristic is particularly suitable for high-speed battery powered devices requiring dynamic performance.

Key Features

  • OptimWatt device featuring ultra-low 2 mW consumption and low 400 μA quiescent current(a) Bandwidth: 120 MHz (gain = 2) Slew rate: 115 V/μs Specified on 1 kΩ Input noise: 7.5 nV/√ Hz Tested with 5 V power supply 300 krad MIL-STD-883 1019.7 ELDRS free compliant SEL immune at 125° C, LET up to 110 MEV. cm2/mg SET characterized, LET up to 110 MEV. cm2/mg QMLV qualified under SMD 5962-0723301 Mass: 0.45 g www. DataSheet. net/ TM Pin connections (top view) 1 NC IN IN + -VCC 4 5 8 NC +VCC OUT NC.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
RHF310 Rad-hard 400 µA high-speed operational amplifier Preliminary data Features ■ OptimWatt device featuring ultra-low 2 mW consumption and low 400 μA quiescent current(a) Bandwidth: 120 MHz (gain = 2) Slew rate: 115 V/μs Specified on 1 kΩ Input noise: 7.5 nV/√ Hz Tested with 5 V power supply 300 krad MIL-STD-883 1019.7 ELDRS free compliant SEL immune at 125° C, LET up to 110 MEV.cm2/mg SET characterized, LET up to 110 MEV.cm2/mg QMLV qualified under SMD 5962-0723301 Mass: 0.45 g www.DataSheet.net/ TM Pin connections (top view) 1 NC IN IN + -VCC 4 5 8 NC +VCC OUT NC ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the package. Description The RHF310 is a very low power, high-speed operational amplifier.