Datasheet4U Logo Datasheet4U.com

RHF330A - low noise operational amplifier

General Description

The RHF330A device is a current feedback, single operational amplifier that uses very high-speed complementary technology to provide a large bandwidth of 1 GHz in gains of 2 while drawing only 16.6 mA of quiescent current.

The RHF330A, also offers 0.1 dB gain flatness up to 160 MHz with a gain of 2.

Key Features

  • Bandwidth: 1 GHz (gain = 2).
  • Slew rate: 1800 V/μs.
  • Input noise: 1.3 nV/√ Hz.
  • Distortion: SFDR = -78 dBc (10 MHz, 2 Vpp).
  • 100 Ω load optimized output stage.
  • 5 V power supply.
  • ELDRS free up to 300 krad.
  • SEL immune at 110 MeV. cm2/mg.
  • SET characterized.
  • SMD pin: 5962F07231.
  • Mass: 0.45 g.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RHF330 Amplifiers ST Microelectronics
RHF350 Amplifiers ST Microelectronics
RHFL7913 Rad-Hard adjustable negative voltage regulator ST Microelectronics

Other Datasheets by STMicroelectronics

Part Number Description
RHF310 high-speed operational amplifier
RHF310A high-speed operational amplifier
RHF43B RAD-hardened precision bipolar single operational amplifier
RHF484 Rad-hard precision quad operational amplifier
RHFAD128 12-bit A/D converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
RHF330A Datasheet Rad-hard 1 GHz low noise operational amplifier Product status link RHF330A Features • Bandwidth: 1 GHz (gain = 2) • Slew rate: 1800 V/μs • Input noise: 1.3 nV/√ Hz • Distortion: SFDR = -78 dBc (10 MHz, 2 Vpp) • 100 Ω load optimized output stage • 5 V power supply • ELDRS free up to 300 krad • SEL immune at 110 MeV.cm2/mg • SET characterized • SMD pin: 5962F07231 • Mass: 0.45 g Applications • Space data acquisition systems • Aerospace instrumentation • Nuclear and high energy physics • Harsh environments • ADC drivers Description The RHF330A device is a current feedback, single operational amplifier that uses very high-speed complementary technology to provide a large bandwidth of 1 GHz in gains of 2 while drawing only 16.6 mA of quiescent current.