Datasheet4U Logo Datasheet4U.com

HD74BC240A - Octal Buffers/Line Drivers

Description

The HD74BC240A provides high drivability and operation equal to or better than high speed bipolar standard logic IC by using Bi-CMOS process.

Features

  • low power dissipation that is about 1/5 of high speed bipolar logic IC, when the frequency is 10 MHz. The device has eight inverter drivers with three state outputs in a 20 pin package. This device is a non inverting buffer and has two active low enables (1G and 2G). Each enable independently controls 4 buffers. Features.
  • Input/Output are at high impedance state when power supply is off.
  • Built in input pull up circuit can make input pins be open, when not used.
  • TTL.

📥 Download Datasheet

Datasheet Details

Part number HD74BC240A
Manufacturer Renesas
File Size 113.78 KB
Description Octal Buffers/Line Drivers
Datasheet download datasheet HD74BC240A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD74BC240A Octal Buffers/Line Drivers With 3 State Outputs Hitachi Semiconductor
HD74BC244A Octal Buffers/Line Drivers With 3 State Outputs Hitachi Semiconductor
HD74BC245A Octal Bus Transceivers With 3 State Outputs Hitachi Semiconductor
HD74BC373A Octal D Type Transparent Latches With 3 State Outputs Hitachi Semiconductor
HD74BC374A Octal D Type Flip Flops With 3 State Outputs Hitachi Semiconductor

Other Datasheets by Renesas

Part Number Description
HD74BC244A Octal Buffers/Line Drivers
HD74BC245A Octal Bus Transceivers
HD74BC373A Octal D Type Transparent Latches
HD74BC374A Octal D Type Flip Flops
HD74BC540A Octal Buffers/Line Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HD74BC240A Octal Buffers/Line Drivers With 3 State Outputs REJ03D0280–0300Z (Previous ADE-205-006A (Z)) Rev.3.00 Jul.16.2004 Description The HD74BC240A provides high drivability and operation equal to or better than high speed bipolar standard logic IC by using Bi-CMOS process. The device features low power dissipation that is about 1/5 of high speed bipolar logic IC, when the frequency is 10 MHz. The device has eight inverter drivers with three state outputs in a 20 pin package. This device is a non inverting buffer and has two active low enables (1G and 2G). Each enable independently controls 4 buffers. Features • Input/Output are at high impedance state when power supply is off. • Built in input pull up circuit can make input pins be open, when not used.