Datasheet4U Logo Datasheet4U.com

BD9E102FJ - MOSFET Single Synchronous Buck DC/DC Converter

Description

The BD9E102FJ is a synchronous buck switching regulator with low on-resistance built-in power MOSFETs.

High efficiency at light load with a SLLMTM.

It is most suitable for use in the equipment to reduce the standby power is required.

Features

  • high-speed transient response. Phase compensation can also be set easily.  Key Specifications.
  • Input voltage range: 7.0V to 26V.
  • Adjustable output voltage range: 1.0V to VIN x 0.7V.
  • Maximum output current: 1.0 A (Max. ).
  • Switching frequency: 570 kHz (Typ. ).
  • High-Side MOSFET on-resistance: 250 mΩ (Typ. ).
  • Low-Side MOSFET on-resistance: 200 mΩ (Typ. ).
  • Shutdown current: 0 μA (Typ. )  Features.
  • Synchronous single DC/DC converter.
  • SLLMTM contro.

📥 Download Datasheet

Datasheet Details

Part number BD9E102FJ
Manufacturer ROHM
File Size 1.01 MB
Description MOSFET Single Synchronous Buck DC/DC Converter
Datasheet download datasheet BD9E102FJ Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BD900 PNP Transistor INCHANGE
BD900 PNP Transistor Power Innovations Limited
BD900 SILICON POWER TRANSISTOR SavantIC
BD900 Silicon NPN Power Transistors Comset Semiconductors
BD900A PNP Transistor Power Innovations Limited

Other Datasheets by ROHM

Part Number Description
BD9E100FJ-LB 1.0A Integrated MOSFET / Single Synchronous Buck DC/DC Converter
BD9E101FJ-LB 1.0A Integrated MOSFET / Single Synchronous Buck DC/DC Converter
BD9E103FJ 1.5A Integrated MOSFET
BD9E104FJ 1A Integrated MOSFET Single Synchronous Buck DC/DC Converter
BD9E151ANUX Step-Down Switching Regulator

Full PDF Text Transcription

Click to expand full text
7.0V to 26V Input, 1.0A, Integrated MOSFET Single Synchronous Buck DC/DC Converter BD9E102FJ  General Description The BD9E102FJ is a synchronous buck switching regulator with low on-resistance built-in power MOSFETs. High efficiency at light load with a SLLMTM. It is most suitable for use in the equipment to reduce the standby power is required. It is a current mode control DC/DC converter and features high-speed transient response. Phase compensation can also be set easily.  Key Specifications  Input voltage range: 7.0V to 26V  Adjustable output voltage range: 1.0V to VIN x 0.7V  Maximum output current: 1.0 A (Max.)  Switching frequency: 570 kHz (Typ.)  High-Side MOSFET on-resistance: 250 mΩ (Typ.)  Low-Side MOSFET on-resistance: 200 mΩ (Typ.
Published: |