0. ( Z-address 0 ) While RST is low level, no instruction except status read can be accepted. Reset status appears at DB4. After DB4 is low, any i.

Chip select signal for NT7108 (1) Chip select signal for NT7108 (2) Ground Supply voltage for logic Input voltage for LCD H : Data signal, L : Instruction signal H : Read mode, L : Write mode Chip enable signal Data bit 0 Data bit 1 Data bit 2 Data b.

12864-12

12864B-2A

1280G

1285G

128P308

12-23C-R6GHBHC-A01-2C

12-MMB-010-5-D

12-MMB-015-11-G

12-MMB-015-5-E

12-MMB-020-11-D

12-MMB-020-5-E

12-MMB-020-5-F

12-MMB-030-11-D

Since 2006. D4U Semicon.   |   Contact Us   |   Privacy Policy   |   Purchase of parts