Datasheet4U Logo Datasheet4U.com

STK672-532 - 2-phase Stepping Motor Driver

Features

  • The motor speed can be controlled by the frequency of an external clock signal.
  • 2-phase excitation or 1-2 phase excitation is selected according to switching the state of the MODE pin (low or high).
  • The phase is maintained even if the excitation mode is switched in the middle of operation.
  • The direction of rotation can be changed by applying a high or low signal to the CWB pin used to select the direction of rotation.
  • Supports schmitt input for 2.

📥 Download Datasheet

Datasheet Details

Part number STK672-532
Manufacturer onsemi
File Size 134.99 KB
Description 2-phase Stepping Motor Driver
Datasheet download datasheet STK672-532 Datasheet

📁 Similar Datasheet

  • STK672-010 - Thick-Film Hybrid IC (Sanyo Semicon Device)
  • STK672-020 - Unipolar Fixed-Current Chopper (Sanyo Semicon Device)
  • STK672-040 - Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 1.5A) (Sanyo Semicon Device)
  • STK672-050 - Thick-Film Hybrid IC (Sanyo Semicon Device)
  • STK672-050-E - Stepping Motor Driver (Sanyo Semicon Device)
  • STK672-060 - Thick-Film Hybrid IC (Sanyo Semicon Device)
  • STK672-080 - Stepping Motor Driver (Sine Wave Drive) Output Current : 2.8 A (No Heat Sink) (Sanyo Semicon Device)
  • STK672-110 - Two-Phase Stepping Motor Driver (Square Wave Drive) Output Current: 1.8 A (Sanyo Semicon Device)
  • STK672-120 - Two-Phase Stepping Motor Driver (Square Wave Drive) Output Current: 2.4 A (Sanyo Semicon Device)
  • STK672-210 - Two-Phase Stepping Motor Driver Output Current: 1.4 A (Sanyo Semicon Device)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
Ordering number : ENA2111 STK672-532 Thick-Film Hybrid IC 2-phase Stepping Motor Driver http://onsemi.com Overview The STK672-532 is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control. Applications • Office photocopiers, printers, etc. Features • The motor speed can be controlled by the frequency of an external clock signal. • 2-phase excitation or 1-2 phase excitation is selected according to switching the state of the MODE pin (low or high). • The phase is maintained even if the excitation mode is switched in the middle of operation. • The direction of rotation can be changed by applying a high or low signal to the CWB pin used to select the direction of rotation. • Supports schmitt input for 2.5V high level input.
Published: |