STK672-120-SL-E - 2-phase Stepping Motor Driver

Product Overview

ON Semiconductor

Part number	STK672-120-SL-E
Manufacturer	ON Semiconductor
File Size	164.83 KB
Description	2-phase Stepping Motor Driver
Datasheet	STK672-120-SL-E Datasheet
Additional preview pages of the STK672-120-SL-E datasheet.

The motor speed can be controlled by the frequency of an external clock signal (the CLOCK pin signal).
The excitation type is switched according to the state (low or high) of the MODE pin. The mode is set to 2-phase or 1-2phase excitation on the rising edge of the clock signal.
A motor direction switching pin (the CWB pin) is provided.
All inputs are schmitt inputs and 40kΩ (typical:.
50 to +100%) pull-up resistors are built in.
The motor.

📁 Similar Datasheet

STK672-120 - Two-Phase Stepping Motor Driver (Square Wave Drive) Output Current: 2.4 A (Sanyo Semicon Device)
STK672-110 - Two-Phase Stepping Motor Driver (Square Wave Drive) Output Current: 1.8 A (Sanyo Semicon Device)
STK672-010 - Thick-Film Hybrid IC (Sanyo Semicon Device)
STK672-020 - Unipolar Fixed-Current Chopper (Sanyo Semicon Device)
STK672-040 - Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 1.5A) (Sanyo Semicon Device)
STK672-050 - Thick-Film Hybrid IC (Sanyo Semicon Device)
STK672-050-E - Stepping Motor Driver (Sanyo Semicon Device)
STK672-060 - Thick-Film Hybrid IC (Sanyo Semicon Device)

Other Datasheets by ON Semiconductor

Published: Jan 25, 2016 |