Datasheet4U Logo Datasheet4U.com

NJG1107HB3 - LOW NOISE AMPLIFIER GaAs MMIC

General Description

NJG1107HB3 is a Low Noise Amplifier GaAs MMIC designed for GPS This amplifier provides low noise figure, high gain and high IP3 operated by single low positive power supply.

This amplifier includes internal self-bias circuit and input DC blocking capacitor.

Key Features

  • lLow voltage operation lLow current consumption lHigh small signal gain lLow noise figure lHigh Input IP3 lUltra small & ultra thin package nPIN.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJG1107HB6 LNA JRC
NJG1107HA8 Single LNA / USB6-A8 JRC
NJG1108HA8 Single LNA / USB6-A8 JRC
NJG1110PB1 Dual LNA / FFP12-B1 JRC
NJG1112PB1 Triple LNA / FFP12-B1 JRC

Other Datasheets by New Japan Radio

Part Number Description
NJG1107KB2 1.5/1.9GHz LNA GaAs MMIC
NJG1101F WIDE BAND AGC AMPLIFIER GaAs MMIC
NJG1102F1 LOW NOISE AMPLIFIER GaAs MMIC
NJG1103F1 1.5/1.9GHz LOW NOISE AMPLIFIER GaAs MMIC
NJG1104KB2 800MHz BAND LNA GaAs MMIC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com NJG1107HB3 LOW NOISE AMPLIFIER GaAs MMIC nGENERAL DESCRIPTION NJG1107HB3 is a Low Noise Amplifier GaAs MMIC designed for GPS This amplifier provides low noise figure, high gain and high IP3 operated by single low positive power supply. This amplifier includes internal self-bias circuit and input DC blocking capacitor. This amplifier can be tuned to wide frequency point (1.5GHz~2.4GHz). An ultra small and ultra thin package of USB8-B3 is adopted. nFEATURES lLow voltage operation lLow current consumption lHigh small signal gain lLow noise figure lHigh Input IP3 lUltra small & ultra thin package nPIN CONFIGURATION HB3 Type (Top View) nPACKAGE OUTLINE NJG1107HB3 +2.7V typ. 2.5mA typ. 17dB typ. @f=1.575GHz 1.1dB typ. @f=1.575GHz -4.0dBm typ. @f=1.575+1.