Datasheet4U Logo Datasheet4U.com

ADC10DV200 - 200 MSPS Low-Power A/D Converter

Description

The ADC10DV200 is a monolithic analog-to-digital converter capable of converting two analog input signals into 10-bit digital words at rates up to 200 Mega Samples Per Second (MSPS).

The digital output mode is selectable and can be either differential LVDS or CMOS signals.

Features

  • Single 1.8V power supply operation. Power scaling with clock frequency. Internal sample-and-hold. Internal or external reference. Power down mode. Offset binary or 2's complement output data format. LVDS or CMOS output signals. 60-pin LLP package, (9x9x0.8mm, 0.5mm pin-pitch) Clock Duty Cycle Stabilizer. IF Sampling Bandwidth > 900MHz. Key Specifications.
  • Resolution Conversion Rate E.

📥 Download Datasheet

Datasheet Details

Part number ADC10DV200
Manufacturer National Semiconductor Corporation
File Size 566.67 KB
Description 200 MSPS Low-Power A/D Converter
Datasheet download datasheet ADC10DV200 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADC10DV200 Dual 10-bit 200MSPS Low-Power A/D Converter Texas Instruments
ADC10D020 150mW A/D Converter Texas Instruments
ADC10D020 Dual 10-Bit/ 20 MSPS/ 150 mW A/D Converter National Semiconductor
ADC10D040 267mW A/D Converter Texas Instruments
ADC10D040 A/D Converter National Semiconductor

Other Datasheets by National Semiconductor Corporation

Part Number Description
ADC10D1000 Dual 1.0/1.5 GSPS Or Single 2.0/3.0 GSPS ADC
ADC10D1500 Dual 1.0/1.5 GSPS Or Single 2.0/3.0 GSPS ADC
ADC11DV200 200 MSPS Low-Power A/D Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ADC10DV200 Dual 10-bit, 200 MSPS Low-Power A/D Converter with Parallel Outputs February 5, 2009 ADC10DV200 Dual 10-bit, 200 MSPS Low-Power A/D Converter with Parallel LVDS/CMOS Outputs www.datasheet4u.com General Description The ADC10DV200 is a monolithic analog-to-digital converter capable of converting two analog input signals into 10-bit digital words at rates up to 200 Mega Samples Per Second (MSPS). The digital output mode is selectable and can be either differential LVDS or CMOS signals. This converter uses a differential, pipelined architecture with digital error correction and an on-chip sample-and-hold circuit to minimize die size and power consumption while providing excellent dynamic performance. A unique sample-and-hold stage yields a full-power bandwidth of 900MHz.
Published: |