Datasheet4U Logo Datasheet4U.com

SC16C852L - 16 mode or 68 mode bus interface

General Description

The SC16C852L is a 1.8 V, low power, dual channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications.

Its principal function is to convert parallel data into serial data and vice versa.

The UART can handle serial data rates up to 5 Mbit/s.

Key Features

  • are available. The SC16C852L UART provides enhanced UART functions with 128-byte FIFOs, modem control interface, DMA mode data transfer, and IrDA encoder/decoder. The DMA mode data transfer is controlled by the FIFO trigger levels and the TXRDY and RXRDY signals. On-board status registers provide the user with error indications and operational status. System interrupts and modem control features may be tailored by software to meet specific user requirements. An internal loopback capability allows.

📥 Download Datasheet

Full PDF Text Transcription for SC16C852L (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for SC16C852L. For precise diagrams, and layout, please refer to the original PDF.

SC16C852L 1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and 16 mode or 68 mode bus interface Rev. 03 — 18 January 2008 Product data sheet 1. Gener...

View more extracted text
de bus interface Rev. 03 — 18 January 2008 Product data sheet 1. General description The SC16C852L is a 1.8 V, low power, dual channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s. The SC16C852L is pin compatible with the SC16C652B. SC16C852L can be programmed to operate in extended mode (see Section 6.2) where additional advanced UART features are available. The SC16C852L UART provides enhanced UART functions with 128-byte FIFOs, modem contr

More Datasheets from NXP Semiconductors

Part Number Description
SC16C852SV low power dual channel Universal Asynchronous Receiver and Transmitter (UART) used
SC16C852V XScale VLIO bus interface
SC16C850 parallel bus interface
SC16C850L parallel bus interface
SC16C850SV XScale VLIO bus interface
SC16C850V XScale VLIO bus interface
SC16C550B UART
SC16C554B 5 V 3.3 V and 2.5 V quad UART
SC16C554DB 5 V 3.3 V and 2.5 V quad UART
SC16C654B 5 V - 3.3 V and 2.5 V quad UART - 5 Mbit/s (max.)