Datasheet4U Logo Datasheet4U.com

SC16C852V - XScale VLIO bus interface

Description

The SC16C852V is a 1.8 V, low power dual channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications.

Its principal function is to convert parallel data into serial data and vice versa.

The UART can handle serial data rates up to 5 Mbit/s.

Features

  • are available (see Section 6.2). The SC16C852V family UART provides enhanced UART functions with 128-byte FIFOs, modem control interface, DMA mode data transfer, and IrDA encoder/decoder. On-board status registers provide the user with error indications and operational status. System interrupts and modem control features may be tailored by software to meet specific user requirements. An internal loopback capability allows on-board diagnostics. Independent programmable baud rate generators are pro.

📥 Download Datasheet

Datasheet Details

Part number SC16C852V
Manufacturer NXP Semiconductors
File Size 306.63 KB
Description XScale VLIO bus interface
Datasheet download datasheet SC16C852V Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SC16C2550 Dual UART with 16 bytes of transmit and receive FIFOs and infrared (IrDA) encoder/decoder NXP
SC16C2550B dual UART NXP
SC16C2552 Dual UART with 16-byte transmit and receive FIFOs NXP
SC16C550 Universal Asynchronous Receiver/Transmitter (UART) with 16-byte FIFO and infrared (IrDA) encoder/decoder NXP
SC16C554 Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder NXP

Other Datasheets by NXP Semiconductors

Part Number Description
SC16C852L 16 mode or 68 mode bus interface
SC16C852SV low power dual channel Universal Asynchronous Receiver and Transmitter (UART) used
SC16C850 parallel bus interface
SC16C850L parallel bus interface
SC16C850SV XScale VLIO bus interface

Full PDF Text Transcription

Click to expand full text
SC16C852V 1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and XScale VLIO bus interface Rev. 04 — 14 January 2008 Product data sheet 1. General description The SC16C852V is a 1.8 V, low power dual channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s. SC16C852V can be programmed to operate in extended mode where additional advanced UART features are available (see Section 6.2). The SC16C852V family UART provides enhanced UART functions with 128-byte FIFOs, modem control interface, DMA mode data transfer, and IrDA encoder/decoder.
Published: |