Datasheet4U Logo Datasheet4U.com

SC16C850SV - XScale VLIO bus interface

General Description

The SC16C850SV is a 1.8 V, low power single channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications.

Its principal function is to convert parallel data into serial data and vice versa.

Key Features

  • are available (see Section 6.2). The SC16C850SV family UART provides enhanced UART functions with 128-byte FIFOs, modem control interface and IrDA encoder/decoder. On-board status registers provide the user with error indications and operational status. System interrupts and modem control features may be tailored by software to meet specific user requirements. An internal loopback capability allows on-board diagnostics. Independent programmable baud rate generators are provided to select transmit.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SC16C2550 Dual UART with 16 bytes of transmit and receive FIFOs and infrared (IrDA) encoder/decoder NXP
SC16C2550B dual UART NXP
SC16C2552 Dual UART with 16-byte transmit and receive FIFOs NXP
SC16C550 Universal Asynchronous Receiver/Transmitter (UART) with 16-byte FIFO and infrared (IrDA) encoder/decoder NXP
SC16C554 Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder NXP

Other Datasheets by NXP Semiconductors

Part Number Description
SC16C850 parallel bus interface
SC16C850L parallel bus interface
SC16C850V XScale VLIO bus interface
SC16C852L 16 mode or 68 mode bus interface
SC16C852SV low power dual channel Universal Asynchronous Receiver and Transmitter (UART) used

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SC16C850SV 1.8 V single UART, 20 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and XScale VLIO bus interface Rev. 01 — 8 July 2008 Product data sheet 1. General description The SC16C850SV is a 1.8 V, low power single channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 20 Mbit/s (4× sampling rate). SC16C850SV can be programmed to operate in extended mode where additional advanced UART features are available (see Section 6.2).The SC16C850SV family UART provides enhanced UART functions with 128-byte FIFOs, modem control interface and IrDA encoder/decoder.