PCA82C252 Description
Thermally protected PCA82C252 Bus lines protected against transients in an automotive environment An unpowered node does not disturb the bus lines. Support for low-power modes Low current sleep/standby mode with wake-up via the bus lines Power-on reset flag on the output. The PCA82C252 is the interface between the CAN protocol controller and the physical bus.
PCA82C252 Key Features
- Baud rate up to 125 kBaud
- Up to 15 nodes can be connected
- Supports unshielded bus wires
- Low RFI due to built-in slope control function
- Fully integrated receiver filters. Bus failure management
- Supports one-wire transmission modes with ground offset voltages up to 1.5 V
- Automatic switching to single-wire mode in the event of bus failure
- Automatic reset to differential mode if bus failure is removed. Protection
- 10 -40
- 1 0.5 0.5