PCA82C250
PCA82C250 is CAN controller interface manufactured by NXP Semiconductors.
description
The PCA82C250 is the interface between a CAN protocol controller and the physical bus. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller.
2. Features and benefits
- Fully patible with the “ISO 11898” standard
- High speed (up to 1 MBd)
- Bus lines protected against transients in an automotive environment
- Slope control to reduce Radio Frequency Interference (RFI)
- Differential receiver with wide mon-mode range for high immunity against
Electro Magnetic Interference (EMI)
- Thermally protected
- Short-circuit proof to battery and ground
- Low-current Standby mode
- An unpowered node does not disturb the bus lines
- At least 110 nodes can be connected
3. Applications
- High-speed automotive applications (up to 1 MBd).
4. Quick reference data
Table 1. Symbol VCC ICC 1/tbit VCAN Vdiff t PD Tamb
Quick reference data
Parameter
Conditions supply voltage supply current
Standby mode maximum transmission speed non-return-to-zero
CANH, CANL input/output voltage differential bus voltage propagation delay
High-speed mode ambient temperature
Min 4.5 1
- 8 1.5
- 40
Max 5.5 170 +18 3.0 50 +125
Unit V A MBd V V ns C
NXP Semiconductors
CAN controller interface
5. Ordering information
Table 2. Ordering information
Type number
Package
Name
Description
PCA82C250T
SO8 plastic small outline package; 8 leads; body width 3.9 mm
6. Block...
