Datasheet4U Logo Datasheet4U.com

HEF4047B - Monostable/astable multivibrator

Description

The HEF4047B consists of a gatable astable multivibrator incorporating logic techniques to permit positive or negative edge-triggered monostable multivibrator action with retriggering and external counting options.

Inputs include +TRIGGER, TRIGGER, ASTABLE, ASTABLE, RETRIGGER and MR (master reset).

Features

  • 2.1 General.
  • Monostable (one-shot) or astable (free-running) operation.
  • True and complemented buffered outputs.
  • Only one external resistor and capacitor required NXP Semiconductors HEF4047B Monostable/astable multivibrator 2.2 Monostable multivibrator.
  • Positive- or negative-edge triggering.
  • Output pulse width independent of trigger pulse duration.
  • Retriggerable option for pulse-width expansion.
  • Long pulse width possible using small RC components with externa.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HEF4047B Monostable/astable multivibrator Philips
HEF4047B Monostable/astable multivibrator nexperia
HEF4047B-Q100 Monostable/astable multivibrator nexperia
HEF4040B 12-stage binary ripple counter nexperia
HEF4040B-Q100 12-stage binary ripple counter nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
HEF4040B 12-stage binary counter
HEF4041B Quadruple true/complement buffer
HEF4042B Quadruple D-latch
HEF4043B Quadruple R/S latch with 3-state outputs
HEF4044B Quadruple R/S latch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HEF4047B Monostable/astable multivibrator Rev. 4 — 15 September 2014 Product data sheet 1. General description The HEF4047B consists of a gatable astable multivibrator incorporating logic techniques to permit positive or negative edge-triggered monostable multivibrator action with retriggering and external counting options. Inputs include +TRIGGER, TRIGGER, ASTABLE, ASTABLE, RETRIGGER and MR (master reset). Buffered outputs are O, O and OSCILLATOR OUTPUT. In all modes of operation an external capacitor (Ct) must be connected between CTC and RCTC, and an external resistor (Rt) must be connected between RTC and RCTC. A HIGH level on the ASTABLE input enables astable operation. The period of the square wave at O and O outputs is a function of the external components employed.
Published: |