Datasheet4U Logo Datasheet4U.com

MT92101 - IP Phone Processor

Description

The MT92101 IP Phone Processor provides a highly integrated solution for an IP phone for use in enterprise applications.

Features

  • Low Voltage Operation, 1.65 to 1.95 Volts Standard 3.3 Volt Signal Interfaces On-chip RISC CPU and Powerful DSP Standard Integrated System Interfaces Embedded Physical Layer Firmware G.729.AB and G.723.1A Vocoders, including VAD and CNG.
  • Group 3 Fax Relay, 2400.
  • 14400 bps H.323, MGCP, or SIP Protocol Software Available JTAG Port for Debug and Boundary Scan DS5251 ISSUE 1 February 2000 Ordering.

📥 Download Datasheet

Datasheet preview – MT92101

Datasheet Details

Part number MT92101
Manufacturer Mitel
File Size 180.91 KB
Description IP Phone Processor
Datasheet download datasheet MT92101 Datasheet
Additional preview pages of the MT92101 datasheet.

📁 Similar Datasheet

  • MT9201 - High Efficiency Boost White LED Driver (AEROSEMI)
  • MT9222 - Hall Effect-Based Linear Current Sensor (MagnTek)
  • MT92220 - 1023 Channel Voice Over IP/AAL2 Processor (Zarlink Semiconductor)
  • MT90 - Thyristor Modules (Techsem)
  • MT900A-UR - 5mm Ultra Bright LED (Marktech Corporate)
  • MT90210 - Multi-Rate Parallel Access Circuit (Mitel Networks Corporation)
  • MT90220 - Octal IMA/UNI PHY Device (Mitel Networks Corporation)
  • MT90221 - Quad IMA/UNI PHY Device (Mitel Networks Corporation)
  • MT90222 - 4/8/16 Port IMA/TC PHY Device (Zarlink Semiconductor)
  • MT90223 - 4/8/16 Port IMA/TC PHY Device (Zarlink Semiconductor)
Other Datasheets by Mitel
  • MT9122 - Dual Voice Echo Canceller
  • MT9123 - Dual Voice Echo Canceller
  • MT9125 - Dual ADPCM Transcoder
  • MT9126 - Quad ADPCM Transcoder
  • MT9160 - ISO2-CMOS 5 Volt Multi-Featured Codec
  • MT91600 - Programmable SLIC
  • MT9160B - ISO2-CMOS 5 Volt Multi-Featured Codec
  • MT91610 - Analog Ringing SLIC

Full PDF Text Transcription

Click to expand full text
MT92101 IP Phone Processor Preliminary Information Features • • • • • • • • • Low Voltage Operation, 1.65 to 1.95 Volts Standard 3.3 Volt Signal Interfaces On-chip RISC CPU and Powerful DSP Standard Integrated System Interfaces Embedded Physical Layer Firmware G.729.AB and G.723.1A Vocoders, including VAD and CNG* Group 3 Fax Relay, 2400 – 14400 bps H.323, MGCP, or SIP Protocol Software Available JTAG Port for Debug and Boundary Scan DS5251 ISSUE 1 February 2000 Ordering Information MT92101A/PR/BP1R MT92101A/PR/GP1R 288 Ball PBGA 208 Pin QFP -40 °C to +85 °C Description The MT92101 IP Phone Processor provides a highly integrated solution for an IP phone for use in enterprise applications.
Published: |