Datasheet4U Logo Datasheet4U.com

LX8221 - Dual 150mA CMOS Low Dropout Regulator

General Description

KEY

Key Features

  • WWW . Microsemi . C OM The LX8221 family of dual output linear regulators provide for the selection of either fixed or adjustable output voltages, and combine low dropout operation, fast transient performance, tight output voltage accuracy, and ultra-low ground current within a very small package footprint. The PMOS output transistor allows for an ultra-low dropout characteristic (e. g. , typically less than 175mV at 100mA). The individual regulators can be powered from either separate supply vo.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LX8206BA4 Remote control fan controller ZHENGXIN
LX802 SILICON GATE ENHANCEMENT MODE RF POWER LDMOS TRANSISTOR Polyfet RF Devices
LX803 SILICON GATE ENHANCEMENT MODE RF POWER LDMOS TRANSISTOR Polyfet RF Devices
LX803DE 0.8Amp Sensitive Triacs Littelfuse
LX803DT 0.8Amp Sensitive Triacs Littelfuse

Other Datasheets by Microsemi (Microchip)

Part Number Description
LX8211 150mA CMOS Low Dropout Regulator
LX8117-00 0.8/ 1 & 1.2A LOW DROPOUT POSITIVE REGULATORS
LX8117-00CDD 0.8/ 1 & 1.2A LOW DROPOUT POSITIVE REGULATORS
LX8117-00CDT 0.8/ 1 & 1.2A LOW DROPOUT POSITIVE REGULATORS
LX8117-00CST 0.8/ 1 & 1.2A LOW DROPOUT POSITIVE REGULATORS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LX8221 TM ® www.DataSheet4U.com Dual 150mA CMOS Low Dropout Regulator P RODUCTION D ATA S HEET DESCRIPTION KEY FEATURES WWW . Microsemi . C OM The LX8221 family of dual output linear regulators provide for the selection of either fixed or adjustable output voltages, and combine low dropout operation, fast transient performance, tight output voltage accuracy, and ultra-low ground current within a very small package footprint. The PMOS output transistor allows for an ultra-low dropout characteristic (e.g., typically less than 175mV at 100mA). The individual regulators can be powered from either separate supply voltages or the same supply voltage between 2.8V to 6V allowing for maximum system flexibility.