D221I Datasheet D200I Series / High Isolation Miniature / 2W SIP DC/DC COnverters

Manufacturer: MicroPower Direct

D221I d200i series / high isolation miniature / 2w sip dc/dc converters by MicroPower Direct - Datasheet Preview

Datasheet Details

Part number	D221I
Manufacturer	MicroPower Direct
File Size	97.68 KB
Description	D200I Series / High Isolation Miniature / 2W SIP DC/DC COnverters
Datasheet	D221I Datasheet

Overview

D200I Series High Isolation Miniature, 2W SIP DC/DC Converters Electrical Speciﬁcations Speciﬁcations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted.

Speciﬁcations subject to change without notice.

Key Features

Parameter Conditions Min. Typ. Max. 5.5 13.2 26.4 52.0 0.3 Units.
2W Output Power.
3,000 VDC Isolation Input Voltage Range.
Miniature SIP Case.
Single & Dual Outputs Input Filter.
>2 MHour MTBF Reverse Polarity Input Current Output.
28 Standard Models.
Industry Standard Pin-Out Parameter Output Voltage Accuracy Output Voltage Balance Line Regulation Load Regulation (Note 1) Ripple & Noise (20 MHz) (Note 2) Output Power Protection Temperature Coefﬁcient.

📁 Similar Datasheet

Part Number	Description	Manufacturer
D2210	N-Channel 20V MOSFET	VBsemi
D2210UK	METAL GATE RF SILICON FET	Seme LAB
D2211UK	METAL GATE RF SILICON FET	Seme LAB
D2212UK	METAL GATE RF SILICON FET	Seme LAB
D2213UK	METAL GATE RF SILICON FET	Seme LAB

More Datasheets from MicroPower Direct

Part Number	Description
D221	D200 Series / DC/DC Converters
D221RP	D200RP Series / Short Circuit Protected Regulated / 2W SIP DC/DC Converters
D221RPI	D200RPI Series / DC/DC Converters
D221RW	D200RW Series / DC/DC Converters