Datasheet4U Logo Datasheet4U.com

MAX9971 - 300Mbps ATE Drivers/Comparators

Description

The MAX9971/MAX9972 four-channel, ultra-low-power, pin-electronics ICs include, for each channel, a threelevel pin driver, a window comparator, a passive load, and force-and-sense Kelvin-switched parametric measurement unit (PMU) connections.

Features

  • a -2.2V to +5.2V voltage range, includes high-impedance and active-termination (3rd-level drive) modes, and is highly linear even at low voltage swings. The window comparator features 500MHz equivalent input bandwidth and programmable output voltage levels. The passive load provides pullup and pulldown voltages to the device-under-test (DUT). Two grade versions are available, A grade and B grade. The A-grade version provides tight gain and offset matching for the driver and comparator, allowing.

📥 Download Datasheet

📁 Similar Datasheet

  • MAX997 - Beyond-the-Rails Comparators (Maxim)
  • MAX9975 - ATE Driver/Comparator (Maxim)
  • MAX9977 - ATE Driver (Maxim)
  • MAX9979 - Dual 1.1Gbps Pin Electronics (Maxim Integrated)
  • MAX990 - Micropower / Low-Voltage / SOT23 / Rail-to-Rail I/O Comparators (Maxim)
  • MAX991 - High-Speed / Micropower / Low-Voltage / SOT23 / Rail-to-Rail I/O Comparators (Maxim)
  • MAX992 - High-Speed / Micropower / Low-Voltage / SOT23 / Rail-to-Rail I/O Comparators (Maxim)
  • MAX993 - Micropower / Low-Voltage / SOT23 / Rail-to-Rail I/O Comparators (Maxim)
  • MAX9937 - Current-Sense Amplifier (Maxim Integrated)
  • MAX994 - Micropower / Low-Voltage / SOT23 / Rail-to-Rail I/O Comparators (Maxim)
Other Datasheets by Maxim Integrated Products
  • MAX9972 - 300Mbps ATE Drivers/Comparators
  • MAX9973 - (MAX9973 / MAX9974) Dual Driver / Comparator / Load
  • MAX9974 - (MAX9973 / MAX9974) Dual Driver / Comparator / Load
  • MAX9910 - (MAX9910 - MAX9913) Rail-to-Rail I/O Op Amps
  • MAX9911 - (MAX9910 - MAX9913) Rail-to-Rail I/O Op Amps
  • MAX9912 - (MAX9910 - MAX9913) Rail-to-Rail I/O Op Amps
  • MAX9913 - (MAX9910 - MAX9913) Rail-to-Rail I/O Op Amps
  • MAX9914 - (MAX9914 - MAX9917) Rail-to-Rail I/O Op Amps

Full PDF Text Transcription

Click to expand full text
19-0474; Rev 0; 6/06 www.DataSheet4U.com Quad, Ultra-Low-Power, 300Mbps ATE Drivers/Comparators General Description The MAX9971/MAX9972 four-channel, ultra-low-power, pin-electronics ICs include, for each channel, a threelevel pin driver, a window comparator, a passive load, and force-and-sense Kelvin-switched parametric measurement unit (PMU) connections. The driver features a -2.2V to +5.2V voltage range, includes high-impedance and active-termination (3rd-level drive) modes, and is highly linear even at low voltage swings. The window comparator features 500MHz equivalent input bandwidth and programmable output voltage levels. The passive load provides pullup and pulldown voltages to the device-under-test (DUT). Two grade versions are available, A grade and B grade.
Published: |