Datasheet4U Logo Datasheet4U.com

MAX9311 - (MAX9311 / MAX9313) 1:10 Differential LVPECL/LVECL/HSTL Clock and Data Drivers

Description

The MAX9311/MAX9313 are low-skew, 1-to-10 differential drivers designed for clock and data distribution.

These devices allow selection between two inputs.

The selected input is reproduced at 10 differential outputs.

Features

  • an on-chip VBB reference output of 1.425V below the positive supply voltage. The MAX9313 offers an on-chip V BB reference output of 1.32V below the positive supply voltage. Both devices are offered in space-saving, 32-pin 5mm ✕ 5mm TQFP, 5mm x 5mm QFN, and industry-standard 32-pin 7mm x 7mm LQFP packages. Features o +2.25V to +3.8V Differential HSTL/LVPECL Operation o -2.25V to -3.8V LVECL Operation o 30ps (typ) Part-to-Part Skew o 12ps (typ) Output-to-Output Skew o 312ps (typ) Propagation Dela.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX931 Ultra Low-Power / Low-Cost Comparators Maxim
MAX9316 1:5 Differential LVPECL/LVECL/HSTL Clock and Data Driver Maxim
MAX9316A 1:5 Differential LVPECL/LVECL/ HSTL Clock and Data Driver Maxim
MAX9317 Dual 1:5 Differential Clock Drivers Maxim
MAX932 Ultra Low-Power / Low-Cost Comparators Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX9310A 1:5 Clock Driver
MAX9312 (MAX9312 / MAX9314) Dual 1:5 Differential LVPECL/LVECL/HSTL Clock and Data Drivers
MAX9313 (MAX9311 / MAX9313) 1:10 Differential LVPECL/LVECL/HSTL Clock and Data Drivers
MAX9314 (MAX9312 / MAX9314) Dual 1:5 Differential LVPECL/LVECL/HSTL Clock and Data Drivers
MAX9315 1:5 Differential LVPECL/LVECL/HSTL Clock and Data Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2078; Rev 2; 10/02 1:10 Differential LVPECL/LVECL/HSTL Clock and Data Drivers General Description The MAX9311/MAX9313 are low-skew, 1-to-10 differential drivers designed for clock and data distribution. These devices allow selection between two inputs. The selected input is reproduced at 10 differential outputs. The differential inputs can be adapted to accept singleended inputs by connecting the on-chip VBB supply to one input as a reference voltage. The MAX9311/MAX9313 feature low part-to-part skew (30ps) and output-to-output skew (12ps), making them ideal for clock and data distribution across a backplane or a board. For interfacing to differential HSTL and LVPECL signals, these devices operate over a +2.25V to +3.
Published: |