Datasheet4U Logo Datasheet4U.com

MAX7384 - Silicon Oscillator

General Description

The MAX7384 dual-speed silicon oscillator replaces ceramic resonators, crystals, and crystal-oscillator modules as the primary and secondary clock source for microcontrollers in 3V, 3.3V, and 5V applications.

Key Features

  • a factory-programmed high-speed oscillator, a 32.768kHz oscillator, a clock-selector input, and a µP power-on-reset (POR) supervisor. The clock output can be switched at any time between the highspeed clock and the 32.768kHz clock for low-power operation. Switchover is synchronized internally to prowww. DataSheet4U. com vide glitch-free clock switching. Unlike typical crystal and ceramic-resonator oscillator circuits, the MAX7384 is resistant to vibration and EMI. The high-output-drive current and.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX7382 Silicon Oscillator with Reset Output Maxim
MAX7383 Silicon Oscillator with Low-Power Frequency Switching Maxim
MAX7389 Microcontroller Clock Generator Maxim Integrated
MAX738A Current-Mode PWM DC-DC Converters Maxim Integrated
MAX730 5V / Step-Down / Current-Mode PWM DC-DC Converters Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX738 (MAX730 / MAX738 / MAX750 / MAX758) Step Down Current Mode PWM Regulators
MAX7381 3-Pin Silicon Oscillator
MAX7387 System Monitoring Oscillator
MAX7388 System Monitoring Oscillator
MAX7310 2-Wire-Interfaced 8-Bit I/O Port Expander

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3493; Rev 0; 11/04 Silicon Oscillator with Low-Power Frequency Switching and Reset Output General Description The MAX7384 dual-speed silicon oscillator replaces ceramic resonators, crystals, and crystal-oscillator modules as the primary and secondary clock source for microcontrollers in 3V, 3.3V, and 5V applications. The MAX7384 features a factory-programmed high-speed oscillator, a 32.768kHz oscillator, a clock-selector input, and a µP power-on-reset (POR) supervisor. The clock output can be switched at any time between the highspeed clock and the 32.768kHz clock for low-power operation. Switchover is synchronized internally to prowww.DataSheet4U.com vide glitch-free clock switching.