Datasheet4U Logo Datasheet4U.com

DS80C411 - Network Microcontrollers

Download the DS80C411 datasheet PDF. This datasheet also covers the DS80C410 variant, as both devices belong to the same network microcontrollers family and are provided as variant models within a single manufacturer datasheet.

Description

The DS80C410/DS80C411 network microcontrollers offer the highest integration available in an 8051 device.

Peripherals include a 10/100 Ethernet MAC, three serial ports, an optional CAN 2.0B controller, 1-Wire® Master, and 64 I/O pins.

Features

  • gh-Performance Architecture Single 8051 Instruction Cycle in 54ns DC to 75MHz Clock Rate Flat 16MB Address Space Four Data Pointers with Auto-Increment/ Decrement and Select-Accelerate Data Movement 16/32-Bit Math Accelerator Multitiered Networking and I/O 10/100 Ethernet Media Access Controller (MAC) Optional CAN 2.0B Controller 1-Wire Net Controller Three Full-Duplex Hardware Serial Ports Up to Eight Bidirectional 8-Bit Ports (64 Digital I/O Pins) Robust ROM Firmware Supports Network Boot Over.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (DS80C410_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
DS80C400 Network Microcontroller Dallas Semiconducotr
DS80C310 High-Speed Microcontroller Maxim Integrated
DS80C320 High-Speed/Low-Power Microcontrollers Maxim Integrated
DS80C323 High-Speed/Low-Power Microcontrollers Maxim Integrated
DS80C390 Dual CAN High-Speed Microprocessor Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
DS80C410 Network Microcontrollers
DS80C400 Network Microcontroller
DS8005 Smart Card Interface
DS8007 multiprotocol dual smart card interface
DS8007A Multiprotocol Dual Smart Card Interface

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com DS80C410/DS80C411 Network Microcontrollers with Ethernet and CAN www.maxim-ic.com GENERAL DESCRIPTION The DS80C410/DS80C411 network microcontrollers offer the highest integration available in an 8051 device. Peripherals include a 10/100 Ethernet MAC, three serial ports, an optional CAN 2.0B controller, 1-Wire® Master, and 64 I/O pins. The DS80C410 and DS80C411 also include 64kBytes internal SRAM for user application storage and network stack. To enable access to the network, a full applicationaccessible TCP IPv4/6 network stack and OS are provided in the ROM. The network stack supports up to 32 simultaneous TCP connections and can transfer up to 5Mbps through the Ethernet MAC.
Published: |