Datasheet4U Logo Datasheet4U.com

DS8007 - multiprotocol dual smart card interface

General Description

The DS8007 multiprotocol dual smart card interface is a low-cost, dual smart card reader interface supporting all ISO 7816, EMV, and GSM11-11 requirements.

AD0), the DS8007 can easily and directly connect to the nonmultiplexed

Key Features

  • Complete Interface/Control for Two Separate Smart Card Devices.
  • 6kV (min) ESD Protection on Card Interfaces.
  • Internal IC Card Supply Voltage Generation 5.0V ±5%, 65mA (max) 3.0V ±8%, 50mA (max) 1.8V ±10%, 30mA (max).
  • Automatic Card Activation, Deactivation, and Data Communication Controlled by Dedicated Internal Sequencer.
  • Host Interface Through an 8-Bit Parallel Bus (UserSelectable Multiplexed or Nonmultiplexed Modes).
  • Chip Select and Tri-S.

📥 Download Datasheet

Full PDF Text Transcription for DS8007 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for DS8007. For precise diagrams, and layout, please refer to the original PDF.

Rev 0; 1/07 Multiprotocol Dual Smart Card Interface General Description The DS8007 multiprotocol dual smart card interface is a low-cost, dual smart card reader interface...

View more extracted text
l smart card interface is a low-cost, dual smart card reader interface supporting all ISO 7816, EMV, and GSM11-11 requirements. Through its 8-bit parallel bus and dedicated address selects (AD3–AD0), the DS8007 can easily and directly connect to the nonmultiplexed byte-wide bus of a Maxim/Dallas secure microcontroller. Optionally, the parallel bus can be multiplexed to allow direct access to the multiplexed bus of an 80C51-compatible microcontroller through MOVX memory addressing. One integrated UART is multiplexed among the interfaces to allow high-speed automatic smart card processing with each card-possessing, independe