Datasheet4U Logo Datasheet4U.com

MP2188 - COT Synchronous Step Down Switchers

General Description

The MP2188 is a monolithic, step-down, switchmode dual converter with internal power MOSFETs.

to-5.5V input voltage with excellent load and line regulation.

The output voltages of two channels are 1.1V and 1.8V respectively.

Key Features

  • Wide 2.5V-to-5.5V Operating Input Range.
  • Fixed Output Voltages: 1.1V & 1.8V.
  • Adjustable Output Voltage from 0.8V by external FB Resistor.
  • 100% Duty Cycle in Dropout.
  • Up to 3A Output Current.
  • Low IQ: 80µA.
  • 60mΩ and 30mΩ Internal Power MOSFET Switches.
  • Default 1.2MHz Switching Frequency.
  • EN and Power-Good for Power Sequencing.
  • Cycle-by-Cycle Over-Current Protection.
  • Auto Discharge at Power-Off.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP2183K3C10 Safety Standard Capacitor ETC
MP2184K3D30 Safety Standard Capacitor ETC
MP2184K3E10 Safety Standard Capacitor ETC
MP2185K3F70 Safety Standard Capacitor ETC
MP2185K3TA0 Safety Standard Capacitor ETC

Other Datasheets by Monolithic Power Systems

Part Number Description
MP2182 2A Synchronous Step-Down Converter
MP2182GTL 2A Synchronous Step-Down Converter
MP2183 3A Synchronous Step-Down Converter
MP2183GTL 3A Synchronous Step-Down Converter
MP2104 600mA Synchronous Step-Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology DESCRIPTION The MP2188 is a monolithic, step-down, switchmode dual converter with internal power MOSFETs. It can achieve up to 3A continuous output current from a 2.5V–to-5.5V input voltage with excellent load and line regulation. The output voltages of two channels are 1.1V and 1.8V respectively. The constant-on-time control scheme provides fast transient response and eases loop stabilization. Fault condition protections include cycle-by-cycle current limiting and thermal shutdown. The MP2188 is available in small 2.2mmx2.6mm QFN-16 package and requires only a minimal number of readily available standard external components.