LS8297CT, LS8297 Datasheet - LSI

LS8297CT STEPPER MOTOR CONTROLLER

The LS8297 Stepper Motor Controller generates four phase drive signal outputs for controlling two phase Bipolar and four phase Unipolar motors. The outputs are used to drive two H-bridges for the two motor windings in the Bipolar motor or the four driver transistors for the two center- tapped windi.

LS8297CT Features

* Controls Bipolar and Unipolar Motors

* Cost-effective, low current, pin compatible replacement for L297

* Torque ripple compensated half-steps - LS8297CT

* Half and full step modes

* Normal/wave drive

* Direction control

* Reset input

LS8297-LSI.pdf

LS8297CT Datasheet Preview — This datasheet PDF includes multiple part numbers: LS8297CT, LS8297. Please refer to the document for exact specifications by model.

Datasheet Details

Part number:

LS8297CT, LS8297

Manufacturer:

LSI

File Size:

279.73 KB

Description:

Stepper motor controller.

Note:

This datasheet PDF includes multiple part numbers: LS8297CT, LS8297.
Please refer to the document for exact specifications by model.

📁 Related Datasheet

LS8297 STEPPER MOTOR CONTROLLER (LSI)

LS8292 MICRO-STEPPING MOTOR CONTROLLER (LSI)

LS8293 MICRO-STEPPING MOTOR CONTROLLER (LSI)

LS8204 High Performance Dual Operational Amplifier (SGS-Ates Componenti Electronici)

LS80C52 (LS80C5x) CHMOS SINGLE-CHIP 8-BIT MICROCONTROLLER (Intel Corporation)

LS80C54 (LS80C5x) CHMOS SINGLE-CHIP 8-BIT MICROCONTROLLER (Intel Corporation)

LS80C58 (LS80C5x) CHMOS SINGLE-CHIP 8-BIT MICROCONTROLLER (Intel Corporation)

lS80C86 CMOS 16-Bit Microprocessor (Intersil Corporation)

TAGS

LS8297CT LS8297 STEPPER MOTOR CONTROLLER LSI

LS8297CT Distributor