Datasheet4U Logo Datasheet4U.com

JW1221 - Controller for Adaptive 100/120Hz Current Ripple Removing Circuit

Description

JW®1221 is a controller for driving external NMOSFET to remove the 100/120Hz LED current ripple on AC/DC power by a capacitor between VC and GND.

The adaptive technology of JW1221 ensures minimum power dissipation on NMOSFET while removing LED current ripple.

Features

  • Controller for adaptive 100/120Hz current ripple remover Built-in zener diode for input voltage clamping VG output voltage high to 10V Programmable amplitude of LED current ripple Programmable maximum cathode voltage of LED Programmable maximum LED current Short protection Over temperature protection SOT23-6 Package.

📥 Download Datasheet

Datasheet Details

Part number JW1221
Manufacturer JoulWatt
File Size 518.83 KB
Description Controller for Adaptive 100/120Hz Current Ripple Removing Circuit
Datasheet download datasheet JW1221 Datasheet

📁 Similar Datasheet

  • JW1236B - Full color LED control chip (ETC)
  • JW1758A - Offline Step-down LED Controller (SPMICRO)
  • JW1758B - Offline Step-down LED Controller (SPMICRO)
  • JW1758C - Offline Step-down LED Controller (SPMICRO)
  • JW1760 - Non-Isolated Buck LED Driver Controller (SPMICRO)
  • JW1763B - Non-isolated buck LED driver controller (SPMICRO)
  • JW1763C - Non-isolated buck LED driver controller (SPMICRO)
  • JW1769A - Offline Step-down LED Regulator (SPMICRO)
  • JW1769B - Offline Step-down LED Regulator (SPMICRO)
  • JW1769C - Offline Step-down LED Regulator (SPMICRO)
Other Datasheets by JoulWatt
  • JW1221A - Controller for Adaptive 100/120Hz Current Ripple Removing Circuit
  • JW1220 - Controller for Adaptive 100/120Hz Current Ripple Removing Circuit
  • JW1210 - Scalable Adaptive 100/120Hz Current Ripple Remover
  • JW1232 - Adaptive 100/120Hz Current Ripple Remover
  • JW1233 - Adaptive 100/120Hz Current Ripple Remover
  • JW1237 - Adaptive 100/120Hz Current Ripple Remover
  • JW1120 - 20V Synchronous Buck LED Driver
  • JW1501A - Multi-Mode Primary-Side Regulation

Full PDF Text Transcription

Click to expand full text
JW1221 Parameters Subject to Change Without Notice Controller for Adaptive 100/120Hz Current Ripple Removing Circuit DESCRIPTION JW®1221 is a controller for driving external NMOSFET to remove the 100/120Hz LED current ripple on AC/DC power by a capacitor between VC and GND. The adaptive technology of JW1221 ensures minimum power dissipation on NMOSFET while removing LED current ripple. JW1221 allows user to setup maximum LED current by the sensing resistor between the source of NMOSFET and ground, which protects NMOSFET from being damaged when LED short connected or hot-plug. By sensing the drain voltage of NMOSFET via a resistor between the drain and VLMT pin, JW1221 allows user to setup the maximum cathode voltage of LED string, which could help limit the power dissipation on chip.
Published: |