Datasheet4U Logo Datasheet4U.com

JW1210 - Scalable Adaptive 100/120Hz Current Ripple Remover

Datasheet Summary

Description

AC/DC power by a capacitor between VC and GND.

JW1210 allows user to setup the maximum voltage on LED pin by connect a resistor between VLMT and GND.

Features

  • Scalable Adaptive 100/120Hz Current Ripple Remover 5V~60V Input Voltage Built-in LED Driving MOSFET LED Voltage Low to 0.65V @ 0.25A Programmable LED Current Ripple Programmable maximum LED Voltage Over thermal protection eSOP8 and TO220-5L package.

📥 Download Datasheet

Datasheet preview – JW1210

Datasheet Details

Part number JW1210
Manufacturer JoulWatt
File Size 567.58 KB
Description Scalable Adaptive 100/120Hz Current Ripple Remover
Datasheet download datasheet JW1210 Datasheet
Additional preview pages of the JW1210 datasheet.

📁 Similar Datasheet

  • JW1236B - Full color LED control chip (ETC)
  • JW1758A - Offline Step-down LED Controller (SPMICRO)
  • JW1758B - Offline Step-down LED Controller (SPMICRO)
  • JW1758C - Offline Step-down LED Controller (SPMICRO)
  • JW1760 - Non-Isolated Buck LED Driver Controller (SPMICRO)
  • JW1763B - Non-isolated buck LED driver controller (SPMICRO)
  • JW1763C - Non-isolated buck LED driver controller (SPMICRO)
  • JW1769A - Offline Step-down LED Regulator (SPMICRO)
  • JW1769B - Offline Step-down LED Regulator (SPMICRO)
  • JW1769C - Offline Step-down LED Regulator (SPMICRO)
Other Datasheets by JoulWatt
  • JW1220 - Controller for Adaptive 100/120Hz Current Ripple Removing Circuit
  • JW1221 - Controller for Adaptive 100/120Hz Current Ripple Removing Circuit
  • JW1221A - Controller for Adaptive 100/120Hz Current Ripple Removing Circuit
  • JW1232 - Adaptive 100/120Hz Current Ripple Remover
  • JW1233 - Adaptive 100/120Hz Current Ripple Remover
  • JW1237 - Adaptive 100/120Hz Current Ripple Remover
  • JW1120 - 20V Synchronous Buck LED Driver
  • JW1501A - Multi-Mode Primary-Side Regulation

Full PDF Text Transcription

Click to expand full text
Parameters Subject to Change Without Notice JW1210 Scalable Adaptive 100/120Hz Current Ripple Remover 350mA maximum input current FEATURES Scalable Adaptive 100/120Hz Current Ripple Remover 5V~60V Input Voltage Built-in LED Driving MOSFET LED Voltage Low to 0.65V @ 0.25A Programmable LED Current Ripple Programmable maximum LED Voltage Over thermal protection eSOP8 and TO220-5L package APPLICATIONS LED Lighting DESCRIPTION JW1210 is used to drive a LED string (＜60V), and remove the 100/120Hz current ripple on AC/DC power by a capacitor between VC and GND. JW1210 allows user to setup the maximum voltage on LED pin by connect a resistor between VLMT and GND.
Published: |