CPC1590PTR Datasheet | IXYS

Features - 3750Vrms Input-to-Output Isolation - Drives External Power MOSFET - Low LED Current (2.5m A) - Requires No External Power Supply - Load Voltages up to 200V - High Reliability - Small 8-pin Surface Mount Flatpack Package - Machine Insertable, Wave Solderable - Tape and Reel Version Available - Flammability Rating UL 94 V-0 Applications - Industrial Controls - Instrumentation - Medical Equipment Isolation - Electronic Switching - I/O Subsystems - Appliances Figure 1. CPC1590 Block Diagram 1 NC 4 LED + 2 CPC1590 Optically Isolated Gate Driver Description The CPC1590 is a MOSFET Gate Driver that requires no external power supply: it regulates the input voltage drawn from the load (up to 200V), down to 12.2V for internal use. It is specifically designed for low duty cycle switching applications that drive up to 4n F of gate capacitance. The CPC1590 acplishes very fast MOSFET turn-on by supplying stored charge, from an external capacitor, to the MOSFET gate when input control current is applied to the device’s LED. After the MOSFET is turned on, photocurrent from the input optocoupler keeps it on for as long as sufficient input control current flows, so there is no low-frequency operating limit. When the MOSFET is turned off, the storage capacitor charges from the device’s regulated internal voltage in preparation for the next turn-on. Because it is provided in a small, 8-pin Flatpack package and requires no separate power supply, the CPC1590 provides a flexible design solution that consumes the least amount of PCB land area. Approvals - UL Recognized ponent: File E76270 Ordering Information Part CPC1590P CPC1590PTR Description 8-Pin Flatpack (50/Tube) 8-Pin Flatpack (1000/Reel) 8 CAP - 3 DS-CPC1590-R02...