Datasheet4U Logo Datasheet4U.com

ILX485DT - Slew-Rate-Limited RS-485/RS-422 Transceivers

Download the ILX485DT datasheet PDF. This datasheet also covers the ILX485N variant, as both devices belong to the same slew-rate-limited rs-485/rs-422 transceivers family and are provided as variant models within a single manufacturer datasheet.

Description

The ILX485 is low-power transceivers for RS-485 and RS- 422 communication.

IC contains one driver and one receiver.

The driver slew rates of the ILX485 is not limited, allowing them to transmit up to 10 Mbps.

Features

  • ILX485N ILX485D ILX485DT Low Quiescent Current: 300µA -7V to +12V Common-Mode Input Voltage Range Three-State Outputs 50ns Propagation Delays, 5ns Skew Full-Duplex and Half-Duplex Versions Available Operate from a Single 5V Supply Allows up to 32 Transceivers on the Bus Data rate: 10 Mbps Current-Limiting and Thermal Shutdown for Driver Overload Protection Enhanced ESD Specifications: ±15kV IEC61000-4-2 Air Discharge ±8kV IEC61000-4-2.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (ILX485N_IKSemiconductor.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number ILX485DT
Manufacturer IK Semiconductor
File Size 465.62 KB
Description Slew-Rate-Limited RS-485/RS-422 Transceivers
Datasheet download datasheet ILX485DT Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ILX103A 3000-pixel CCD Linear Image Sensor Sony
ILX115LA 5000-pixel X 3 line CCD Linear Sensor Sony Corporation
ILX128MA 5350-pixel X 6-line CCD Linear Sensor Sony Corporation
ILX137K 10700-pixel x 6-line CCD Linear Sensor Sony
ILX146K The Industrys First Digital Copier CCD Linear Sensor ETC

Other Datasheets by IK Semiconductor

Part Number Description
ILX485D Slew-Rate-Limited RS-485/RS-422 Transceivers
ILX485 Drivers/Receiver
ILX485N Slew-Rate-Limited RS-485/RS-422 Transceivers
ILX232 Drivers/Receivers
ILX3085 Interface Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TECHNICAL DATA Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers Description The ILX485 is low-power transceivers for RS-485 and RS- 422 communication. IC contains one driver and one receiver. The driver slew rates of the ILX485 is not limited, allowing them to transmit up to 10 Mbps. These transceivers draw between 120µA and 500µA of supply current when unloaded or fully loaded with disabled drivers. All parts operate from a single 5V supply. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a highimpedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.
Published: |