Datasheet4U Logo Datasheet4U.com

FXL4T245 - Low Voltage Dual Supply 4-Bit Signal Translator

Description

The FXL4T245 is a configurable dual-voltage-supply translator designed for bi-directional voltage translation of signals between two voltage levels.

The device allows translation between voltages as high as 3.6V to as low as 1.1V.

Features

  • s Bi-directional interface between any 2 levels from 1.1V to 3.6V s Fully configurable, inputs track VCC level s Non-preferential power-up sequencing; either VCC may be powered-up first s No power-up sequencing required s Outputs remain in 3-STATE until active VCC level is reached s Outputs switch to 3-STATE if either VCC is at GND s Power-off protection s Control inputs (T/R, OE) levels are referenced to VCCA voltage s Packaged in 14-terminal DQFN (2.5mm x 3.0mm) package s ESD protection exceed.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FXL0412 Wire Wound Molded SMD Power Inductors CJIANG
FXL0420 Wire Wound Molded SMD Power Inductors CJIANG
FXL0518 Wire Wound Molded SMD Power Inductors CJIANG
FXL0530 Wire Wound Molded SMD Power Inductors CJIANG
FXL0615 Wire Wound Molded SMD Power Inductors CJIANG

Other Datasheets by Fairchild (onsemi)

Part Number Description
FXL4TD245 Low Voltage Dual Supply 4-Bit Signal Translator
FXL4245 Low Voltage Dual Supply 8-Bit Signal Translator
FXL2SD106 Low Voltage Dual Supply 6-Bit SD Interface Voltage Translator
FXL2T245 Low Voltage Dual Supply 2-Bit Signal Translator
FXL2TD245 Low Voltage Dual Supply 2-Bit Signal Translator

Full PDF Text Transcription

Click to expand full text
FXL4T245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs April 2004 Revised June 2004 FXL4T245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs General Description The FXL4T245 is a configurable dual-voltage-supply translator designed for bi-directional voltage translation of signals between two voltage levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks the VCCA level, and the B Port tracks the VCCB level. Both ports are designed to accept supply voltage levels from 1.1V to 3.6V. This allows for bidirectional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.
Published: |