Datasheet4U Logo Datasheet4U.com

FXL2TD245 - Low Voltage Dual Supply 2-Bit Signal Translator

General Description

The FXL2TD245 is a configurable dual-voltage-supply translator designed for both uni-directional and bi-directional voltage translation between two logic levels.

The device allows translation between voltages as high as 3.6V to as low as 1.1V.

Key Features

  • Bi-directional interface between any 2 levels from 1.1V to 3.6V.
  • Fully configurable: Inputs track VCC level.
  • Non-preferential power-up sequencing; either VCC may be powered-up first.
  • Outputs remain in 3-STATE until active VCC level is reached.
  • Outputs switch to 3-STATE if either VCC is at GND.
  • Power-off protection.
  • Control inputs (T/Rn, OE) levels are referenced to VCCA voltage.
  • Packaged in the Chipscale MicroPak10 (1.6mm x 2.1mm).
  • ESD protectio.

📥 Download Datasheet

Full PDF Text Transcription for FXL2TD245 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for FXL2TD245. For precise diagrams, and layout, please refer to the original PDF.

www.DataSheet4U.com FXL2TD245 Low Voltage Dual Supply 2-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Dire...

View more extracted text
ge Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls November 2006 FXL2TD245 Low Voltage Dual Supply 2-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls General Description The FXL2TD245 is a configurable dual-voltage-supply translator designed for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks the VCCA level, and the B Port tracks the VCCB level. This allows for bi-directiona